DFrobot Gravity BME688 AI Environmental Sensor AI gas analysis For VOC, Temperature, Humidity, Pressure

𝐍𝐎𝐓𝐄: 𝐓𝐈𝐃𝐀𝐊 𝐌𝐄𝐍𝐄𝐑𝐈𝐌𝐀 𝐊𝐋𝐀𝐈𝐌 𝐀𝐓𝐀𝐔 𝐊𝐎𝐌𝐏𝐋𝐀𝐈𝐍 𝐃𝐈 𝐋𝐔𝐀𝐑 𝐒𝐈𝐒𝐓𝐄𝐌 𝐓𝐎𝐊𝐎𝐏𝐄𝐃𝐈𝐀

SKU: SEN0617/KF3008

Introduction

The DFRobot Gravity BME688 Environmental Sensor is an advanced, compact MEMS sensor that provides accurate measurements of temperature, humidity, barometric pressure, and volatile organic compounds (VOC). It supports I2C/SPI communication protocols, which facilitate integration with various systems. It also serves as a data source for AI gas analysis, making it an ideal choice for applications requiring precise environmental monitoring and intelligent gas detection. This sensor is well-suited for DIY weather stations, portable environmental monitoring devices, smart home systems, and agricultural monitoring.


Applications
DIY weather stations
Portable environmental monitoring devices
Smart home systems
Agricultural monitoring
Specification
Power Requirements

Operating Voltage: 3.3 to 5V DC
Operating Current: 5mA (25mA with VOC Measurement Enabled)

Output Signal

Interface Options: I2C/SPI

Temperature Sensor

Measurement Range: -40 to +85°C
Accuracy: ±0.5°C (0 to 65°C)

Humidity Sensor

Measurement Range: 0 to 100% Relative Humidity (R.H.)
Accuracy: ±3% R.H. (20 to 80% R.H. at 25°C)

Barometric Pressure Sensor

Measurement Range: 300 to 1100 hPa
Accuracy: ±0.6 hPa (300 to 1100 hPa at 0 to 65°C)

Physical Dimensions

Module Size: 30 mm x 22 mm / 1.18 inches x 0.87 inches

Wiki: https://wiki.dfrobot.com/_SKU_SEN0617_BME688_Environmental_Sensor

Shipping List
Gravity: I2C BME688 Environmental Sensor x1
Gravity UART / I2C sensor cable x1
XH2.54-10pin Header x1