5.0/ 5.0
100% pembeli merasa puas
1 rating • 0 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 8
Subtotal
Rp195.000
Gravity: I2C BMI160 BMI 160 6-Axis Inertial Motion IMU Sensor
Rp195.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 04 - DFROBOT OFFICIAL
𝐍𝐎𝐓𝐄: 𝐓𝐈𝐃𝐀𝐊 𝐌𝐄𝐍𝐄𝐑𝐈𝐌𝐀 𝐊𝐋𝐀𝐈𝐌 𝐀𝐓𝐀𝐔 𝐊𝐎𝐌𝐏𝐋𝐀𝐈𝐍 𝐃𝐈 𝐋𝐔𝐀𝐑 𝐒𝐈𝐒𝐓𝐄𝐌 𝐓𝐎𝐊𝐎𝐏𝐄𝐃𝐈𝐀
SKU: KL3021
Code: SEN0250
The BMI160 6-axis inertial motion sensor is a new product from DFRobot. It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer with ultra-low-power 3-axis gyroscope. Bosch BMI160 is designed for smartphones, tablets, wearable devices. It has built-in intelligent step-counting algorithms that can be read directly through registers.
Built-in 3-axis acceleration and 3-axis gyroscope can detect running, fitness and other motion. Built-in LDO power management chip, supports 3.2~6V wide voltage power supply, and also has I2C level conversion circuit, compatible with Arduino 3.3V and 5V micro controller.
APPLICATION SCENARIOS:
Step Count
Acceleration Detection
Inclination Measurement
Display Toggle Horizontal / Vertical Mode
SPECIFICATIONS:
Operating Voltage: 3.2V~6V
Current Consumption: <1mA
Interface: Gravity-IIC
Acceleration Range: ±2g/±4g/±8g/±16g
Gyroscopes Range: ±125°/s,±250°/s,±500°/s,±1000°/s,±2000°/s
Acceleration Zero-g Offset: ±40mg
Gyroscopes Zero-g Offset: ±10°/s
Programmable Frequency: 25/32Hz~1600Hz
6D Detection and Location
16-bit Data Output
Shock Resistance: 1000gx 200us
2 Independent Programmable Interrupt Generators
In-built 1024 Byte FIFO
Working Temperature:-40℃~ 85℃
Dimension: 22X27mm/0.87x1.06 in
Wiki: https://wiki.dfrobot.com/Gravity__BMI160_6-Axis_Inertial_Motion_Sensor_SKU__SEN0250
SKU: KL3021
Code: SEN0250
The BMI160 6-axis inertial motion sensor is a new product from DFRobot. It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer with ultra-low-power 3-axis gyroscope. Bosch BMI160 is designed for smartphones, tablets, wearable devices. It has built-in intelligent step-counting algorithms that can be read directly through registers.
Built-in 3-axis acceleration and 3-axis gyroscope can detect running, fitness and other motion. Built-in LDO power management chip, supports 3.2~6V wide voltage power supply, and also has I2C level conversion circuit, compatible with Arduino 3.3V and 5V micro controller.
APPLICATION SCENARIOS:
Step Count
Acceleration Detection
Inclination Measurement
Display Toggle Horizontal / Vertical Mode
SPECIFICATIONS:
Operating Voltage: 3.2V~6V
Current Consumption: <1mA
Interface: Gravity-IIC
Acceleration Range: ±2g/±4g/±8g/±16g
Gyroscopes Range: ±125°/s,±250°/s,±500°/s,±1000°/s,±2000°/s
Acceleration Zero-g Offset: ±40mg
Gyroscopes Zero-g Offset: ±10°/s
Programmable Frequency: 25/32Hz~1600Hz
6D Detection and Location
16-bit Data Output
Shock Resistance: 1000gx 200us
2 Independent Programmable Interrupt Generators
In-built 1024 Byte FIFO
Working Temperature:-40℃~ 85℃
Dimension: 22X27mm/0.87x1.06 in
Wiki: https://wiki.dfrobot.com/Gravity__BMI160_6-Axis_Inertial_Motion_Sensor_SKU__SEN0250
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan