4.9/ 5.0
100% pembeli merasa puas
13 rating • 3 ulasan
5(12)92.31%
4(1)7.69%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 57
Subtotal
Rp25.000
Pembersih printer 3D heated bed | 3D printer bed cleaner spray 100 ML
Rp25.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 3D printer
klin's Indonesia sudah terdaftar pada Dirjen HAKI (Direktorat Jenderal Kekayaan Intelektual) tanggal 11 Desember 2018 dengan nomor IDM.000636808
Klin’s 3D Printer Bed Cleaner
“Better Adhesion”
Petunjuk Penggunaan:
1. Pastikan HEATED BED dalam keadaan tidak panas/hangat.
2. Semprotkan cairan langsung ke heated bed yang akan dibersihkan.
3. Lap searah dengan kain lembut atau bahan yang menyerap.
4. Jangan dibilas dengan air, cairan akan dengan cepat mengering.
5. Tunggu sekitar 5 menit untuk penggunaan heated bed.
Klin’s 3D Printer Bed Cleaner eliminates the thin
plastic layer deposited after each print and allows
for a better adhesion for the next. Klin’s 3D Printer
Bed Cleaner is an aqueous formulation specially
made for FDM 3D printers. It cleans, degreases,
and helps eliminates films of plastic materials,
paints, glues and adhesives.
Non corrosive. Klin’s 3D Printer Bed Cleaner does
not deteriorate or alters in any way the treated
surface. It’s compatible with all 3D printer beds
(glass, resin, composites, aluminium or metal).
Applying Klin’s 3D Printer Bed Cleaner to 3D
printed pieces is a good way to clean them before
printing, or after sanding them. The spray
evaporates quickly.
Directions:
1. Spray the 3D printer bed, then wipe the surface with a soft piece of cloth or absorbing paper.
2. If needed repeat the cleaning process. Do not wash away, the product quickly evaporates after wiping.
3. Do not use on a warm printer bed.
CAUTION: Flammable. Eye Irritant.
PRECAUTIONARY MEASURES: Keep away from heat, sparks, flames and other ignition sources. Store below 48°C. Avoid contact with eyes.
FIRST AID: In case of eye contact, flush thoroughly with water for at least 15 minutes. If irritation persists, contact a physician.
KEEP OUT OF REACH OF CHILDREN AND PETS.
Netto: Spray 100 mL.
Klin’s 3D Printer Bed Cleaner
“Better Adhesion”
Petunjuk Penggunaan:
1. Pastikan HEATED BED dalam keadaan tidak panas/hangat.
2. Semprotkan cairan langsung ke heated bed yang akan dibersihkan.
3. Lap searah dengan kain lembut atau bahan yang menyerap.
4. Jangan dibilas dengan air, cairan akan dengan cepat mengering.
5. Tunggu sekitar 5 menit untuk penggunaan heated bed.
Klin’s 3D Printer Bed Cleaner eliminates the thin
plastic layer deposited after each print and allows
for a better adhesion for the next. Klin’s 3D Printer
Bed Cleaner is an aqueous formulation specially
made for FDM 3D printers. It cleans, degreases,
and helps eliminates films of plastic materials,
paints, glues and adhesives.
Non corrosive. Klin’s 3D Printer Bed Cleaner does
not deteriorate or alters in any way the treated
surface. It’s compatible with all 3D printer beds
(glass, resin, composites, aluminium or metal).
Applying Klin’s 3D Printer Bed Cleaner to 3D
printed pieces is a good way to clean them before
printing, or after sanding them. The spray
evaporates quickly.
Directions:
1. Spray the 3D printer bed, then wipe the surface with a soft piece of cloth or absorbing paper.
2. If needed repeat the cleaning process. Do not wash away, the product quickly evaporates after wiping.
3. Do not use on a warm printer bed.
CAUTION: Flammable. Eye Irritant.
PRECAUTIONARY MEASURES: Keep away from heat, sparks, flames and other ignition sources. Store below 48°C. Avoid contact with eyes.
FIRST AID: In case of eye contact, flush thoroughly with water for at least 15 minutes. If irritation persists, contact a physician.
KEEP OUT OF REACH OF CHILDREN AND PETS.
Netto: Spray 100 mL.
Ada masalah dengan produk ini?