REX-C100 Digital PID Temperature Controller 40DA SSR Output

Is Smart Device : no Cable Length : 1m Usage : Industrial Display Size : 1.9 Inches amp; Under Origin : Mainland China Certification : CE Features: Model: REX-C100 PID control Surface frame(W x H): 48mm x 48mm Shape (W x H x D): 44mm x 44mm x 100mm Hole size (W x H): (44+1)mm x (44+1)mm The main technical indicators: Measurement Precision:0.5% FS Cold junction Compensation error: 2 (0-50 within the software correction) Resolution: 14bit Sampling Period: 0.5 Sectetary Power Supply: AC 100-240V 50Hz Control Mode: industrial-grade expert self-tuning PID technology, compared with the traditional PID control with rapid temperature control, fast response, small overshoot, high precision control Insulation Resistance: gt;500m (500V DC) Dielectric Strength: 1500VCA/min Power Sonsumption: lt; 10VA Occasions Environment: 0-50, 30-85% RH non-corrosive gases K type thermocouple: 0-400 Setting Mode: SV/PV normal display state, click the #34;SET #34;button, the SV display is flashing by pressing the #34; lt; #34;button, find the desired set temperature digits, and then click the #34;SET #39;button, the meter tum to the SV/PV Normal display state Parameter Setting Mode: This parameter is used to set the alarm, PID constants and other parameters. Normal display mode, press and hold theSET #34;button for three seconds, the PV display shows the parameter setting mode, display the corresponding values in theSV #34; display parameters in the following table, press theSET #34; button to display symbols: Note: display the reply teature native When the operator parameter setting modify operation not to retum to the main display mode, the instrument will return to the main display mode automatically after 30