Atur jumlah dan catatan
Stok Total: 114
Subtotal
Rp1.442.000
RUMBA Mainboard 32Bit 3D Printer Mainboard with 2204 LCD Tech Up
Rp1.442.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Membeli produk ini berarti setuju untuk menunggu masa pre order 15hari dari tanggal diorder
RUMBA Mainboard 32Bit 3D Printer Mainboard with 2204 LCD Tech Up
Kami Menyediakan Berbagai Macam Barang yang Anda Butuhkan
- Item Pre-Order (6 - 10 Hari).
- Semua Produk Berkualitas.
- Pengiriman Cepat (Tergantung Alamat Pengiriman).
- Hubungi Kami Untuk Menanyakan Ketersediaan Barang.
Happy Shopping !
Package Included:
rumba main control board*1
USB data cable*1
2004 LCD display*1
Adapter board*1
Gray cable *2
Specifications:
Input voltage (recommended): 12-24V
Input voltage (limit): 6-35V
Stepping driver: 6 (support SPI socket StepStick)
MOSFET output: 6
Maximum bed current: 20A
Maximum heater current: 5A
Number of thermistor connections: 5
Limit switch: 6
Firmware: Marlin bufix-2.0
RUMBA32 is a brand new control board from Aus3D! RUMBA32 relies on Marlin 2.0's 32-bit support, which is rapidly evolving, so documentation and configuration settings may be subject to change. Please make sure you are comfortable following the instructions in our getting started guide before purchasing RUMBA32.
--- There is a small fault in the current batch of boards that means the SPI-mode for TMC stepper drivers will not work correctly out of the box. This requires a small mod with a soldering iron for each socket being used with an SPI -mode stepper driver. We can apply this mod on purchase if you plan to use SPI drivers. If you have purchased a board previously, we can provide instructions on the mod or can organise a return to have the modification made. Please see our mos instructions(pdf)or contact us for assistance. ---
They're great-plenty of stepper drivers, heater/fan channels to spare, and they're built like a tank. Their biggest weakness? Like most other printer control boards, they're 8-bit. Built
Tech Up-1695832
Ini produk import, tidak ada garansi, kami hanya jasa import barang saja, jadi
RUMBA Mainboard 32Bit 3D Printer Mainboard with 2204 LCD Tech Up
Kami Menyediakan Berbagai Macam Barang yang Anda Butuhkan
- Item Pre-Order (6 - 10 Hari).
- Semua Produk Berkualitas.
- Pengiriman Cepat (Tergantung Alamat Pengiriman).
- Hubungi Kami Untuk Menanyakan Ketersediaan Barang.
Happy Shopping !
Package Included:
rumba main control board*1
USB data cable*1
2004 LCD display*1
Adapter board*1
Gray cable *2
Specifications:
Input voltage (recommended): 12-24V
Input voltage (limit): 6-35V
Stepping driver: 6 (support SPI socket StepStick)
MOSFET output: 6
Maximum bed current: 20A
Maximum heater current: 5A
Number of thermistor connections: 5
Limit switch: 6
Firmware: Marlin bufix-2.0
RUMBA32 is a brand new control board from Aus3D! RUMBA32 relies on Marlin 2.0's 32-bit support, which is rapidly evolving, so documentation and configuration settings may be subject to change. Please make sure you are comfortable following the instructions in our getting started guide before purchasing RUMBA32.
--- There is a small fault in the current batch of boards that means the SPI-mode for TMC stepper drivers will not work correctly out of the box. This requires a small mod with a soldering iron for each socket being used with an SPI -mode stepper driver. We can apply this mod on purchase if you plan to use SPI drivers. If you have purchased a board previously, we can provide instructions on the mod or can organise a return to have the modification made. Please see our mos instructions(pdf)or contact us for assistance. ---
They're great-plenty of stepper drivers, heater/fan channels to spare, and they're built like a tank. Their biggest weakness? Like most other printer control boards, they're 8-bit. Built
Tech Up-1695832
Ini produk import, tidak ada garansi, kami hanya jasa import barang saja, jadi
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan