ESP32 Relay Board IoT ESP 32 automation smart home

ESP 32 GENERAL PURPOSES RELAY BOARD
This board has some useful features:

 

4x SPDT Relays with independent power supply

5x Solid State Relays

6x GPIO pin connected to 4x PWM pin and 6x ADC pin.

1x I2C port

2x UART port (1x for debug and programming)

I2C Real Time Clock Module

I2C Oled Display

3x buttons

1x RGB Led

1x buzzer

1x SDCard slot

 

You can use this board for any project like:

IoT home automation

You can use the relays or solid state relays for controlling your home equipment based on time or other conditions.

Smart incubator

You can add sensors like DHT11/DHT22 for humidity and temperature monitoring or an LDR circuit that is connected to the GPIO pin then you can use relays to control the heater or fan.

Smart greenhouse

You can add sensors like soil sensors and DHT11/DHT22 for humidity and temperature monitoring that is connected to the GPIO pin then you can use relays to control the water pump or heater and fan.

Data logger

You can use the Micro SDCard slot to record all activity and your sensor data.

ETC...