Ads1115 Konverter Adc Pga Analog-To-Digital Adc 16 Bit 4 Saluran

High precision ADS1115 16 Bit 4 Analog-to-Digital ADC Converter An easy to use I2C ADC Converter, with Programmable Gain Amplifier Especially a good tool for Raspberry Pi that doesn't come with analog GPIO pins Wide voltage supply range: 2.0V to 5.5V, operate in a comparator mode whi is helpful for maintaining accuracy Single-Shot Mode: Auto Shut Down; Programmable data rate: 8sps-860sps Material: metal color: blue For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 3300 samples/second over I2C. The ip can be configured as 4 single-ended input s, or two differential s. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. The ip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. Simply connect GND to ground, VDD to your logic power supply, and SCL/SDA to your microcontroller's I2C port and run the example e to start reading data. Parameters: ADC Bit rate: 16 Bit Interface Type: I2C s: 4 AN0 AN1 AN2 AN3 Input voltage: 2.0v-5.5v input voltage: 0-VDD Continuous Mode: Only 150uA Single-Shot Mode: Auto Shut Down Programmable data rate: 8sps-860sps Input range programmed control, 7 types input ranges: -0.256V 0.256V, -0.512V 0.512V, -1.024V 1.024V, -2.048V 2.048V, -4.096V 4.096 V, -6.144V 6.144V I2C 7-bit addresses between 0x48-0x4B Package Included: 1 ADS1115 16 Bit 4 Analog-to-Digital ADC Converter 1 Pin Header Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.