Bluetooth Audio Module Mono/Stereo Bluetooth Receiver module 5V

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Batch yg baru, stok yg baru ukuran boardnya lebih compact dan ringkas. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Catatan : Kapasitor yg dikirim bisa tidak persis seperti gambar. Voltage : 5V https://www.tokopedia.com/lisuinstrument/bluetooth-audio-module-mono-stereo-bluetooth-receiver-module-5v Untuk 3.7V : https://www.tokopedia.com/lisuinstrument/3-7v-bluetooth-audio-module-mono-stereo-bluetooth-receiver-module Terkait: https://www.tokopedia.com/lisuinstrument/stereo-4-2-bluetooth-amplifier-module-5w-5w-w-micro-usb-charging-port LED connection status: - Fast blinking : not paired - Full : paired - Slow blinking: paired dan menerima data audio Capacitors : They eliminate the DC component generated by the module which is around 1.4 volts per channel. Dropping that kind of voltage on a low impedance input - say your regular headphones - would draw too much current for the module. Constant heat will be generated both on the module side and in the speakers prematurely shortening their lives. Description: The module can choose stereo output, and the Bluetooth antenna is built.It can be used as common power amplifier and active speaker to increase Bluetooth connection function. 7PIN output interface for spacing 2.54 through hole. 7PIN output interface for: + power, ground, left, right, mute, LED status indication, reserved port. Among them, the LED status port is connected with a 100 ohm resistor in series. The LED indicates that the Bluetooth is not connected and the flash is fast. After Bluetooth connection is successful, it is slow flashing.