Atur jumlah dan catatan
Stok Total: 120
Subtotal
Rp972.000
ASS2 High power class A Power amplifier Delayed Soft start DIY Kit/Finished board 110V/220V (Optional) (PROMO)
Rp972.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Produk bisa langsung diorder yaa !!
Brand Name : ASYPDZSW
Model Number : ASS2
Origin : Mainland China
Certification : None
Channels : 2 (2.0)
Package : Yes
Maximum Power Per Channel : Above 200W
Summary:
ASS2 Soft start board working principle is circuit When the power is turned on, First in series with a current limiting resistor into(The resistor is a PTC negative temperature coefficient. Under normal typically 10-50 ohm), After the power is turned on, the resistance heating, the resistance will soon become smaller, generally only a few ohms. Once circuit is activated, the second relay, the short-circuit resistance. So as to achieve the purpose of reducing starting current.
ASS2 Soft-Start can reduce the starting moment of the grid disturbance, Reduce the impact of power circuits and components, to extend the service life of the switch, Avoid instant start causing air switch trip.
This product comes with the seal of power transformers, high current use genuine TYCO relay with 4 NTC thermistors, exquisite workmanship, easy to use, is DIY High-Power power amplifier and power isolation transformer the best partner. In audio applications, the transformer can be matched mono 1500KW load no problem.
Input voltage: AC 110V / 220V
(Optional)
Maximum output power: 1500W/Per channel
PCB Size: 80mm * 80mm
Ouput: OUT 1 and OUT 2
ASS2 Soft start board dedicated to high-power or class A amplifier used, Need wiht self-locking switch used, It can simultaneously control two sets of output transformer connected, Maximum power 1500W.
NOTE: We have DIY kit or finished board
(Optional)
DIY kit ---- All parts need you to solder and test it.
Finished board ---- All parts have been welded and tested OK.
TANPA VIDEO UNBOXING TIDAK MENERIMA KOMPLAIN !!!
Brand Name : ASYPDZSW
Model Number : ASS2
Origin : Mainland China
Certification : None
Channels : 2 (2.0)
Package : Yes
Maximum Power Per Channel : Above 200W
Summary:
ASS2 Soft start board working principle is circuit When the power is turned on, First in series with a current limiting resistor into(The resistor is a PTC negative temperature coefficient. Under normal typically 10-50 ohm), After the power is turned on, the resistance heating, the resistance will soon become smaller, generally only a few ohms. Once circuit is activated, the second relay, the short-circuit resistance. So as to achieve the purpose of reducing starting current.
ASS2 Soft-Start can reduce the starting moment of the grid disturbance, Reduce the impact of power circuits and components, to extend the service life of the switch, Avoid instant start causing air switch trip.
This product comes with the seal of power transformers, high current use genuine TYCO relay with 4 NTC thermistors, exquisite workmanship, easy to use, is DIY High-Power power amplifier and power isolation transformer the best partner. In audio applications, the transformer can be matched mono 1500KW load no problem.
Input voltage: AC 110V / 220V
(Optional)
Maximum output power: 1500W/Per channel
PCB Size: 80mm * 80mm
Ouput: OUT 1 and OUT 2
ASS2 Soft start board dedicated to high-power or class A amplifier used, Need wiht self-locking switch used, It can simultaneously control two sets of output transformer connected, Maximum power 1500W.
NOTE: We have DIY kit or finished board
(Optional)
DIY kit ---- All parts need you to solder and test it.
Finished board ---- All parts have been welded and tested OK.
TANPA VIDEO UNBOXING TIDAK MENERIMA KOMPLAIN !!!
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan