Avalon V5, Class A Mono Mic-Line PRE-RE-AMP DI

V5 Pure Class A Mono Mic-Line Pre-Re-Amp & DI Specifications:
Audio Circuit Topology: 100% discrete, high-voltage, Class A
Gain: Switched 2dB steps, -/+ 0.15dB
Input Modes (4): Line, Instrument-DI, Microphone high-Z & low-Z
LINE (transformer): Balanced 6,000 , XLRTRS, gain -3dB36dB, max. input 47dB
INSTRUMENT DI: Unbalanced 10,000,000 , TRS, gain 2dB42dB, max. input 36dB
MICROPHONE HiZ (transformer): Balanced 6,700 , XLR, gain 20dB 60dB, max. input 23dB
MICROPHONE LoZ (transformer): Balanced 1,760 , XLR, gain 26dB 66dB, max. input 19dB
PAD (passive input attenuator): Line -13dB, Instrument -10dB & Microphone -15dB
Phantom Power: 48V regulated @10mA, blue=power ON, red=phantom ON
Thru output: Unbalanced, impedance buffered TRS
Maximum line ouput level: +30dB DC coupled, balanced 600 , XLRTRS
Maximum isolated output level: +12dB transformer balanced high Z output, TRS
Headphone output: 0.5w into 600 , TRS
Noise 20kHz, unweighted: -100dBu minimum gain position
Noise (EIN) 22Hz-22kHz: -128dB @ 40dB gain (low Z microphone output)
Distortion THD, IMD: 0.05% at +10dB output
Frequency response, -/+0.5dB: 5Hz to 50kHz
Frequency response, -3dB: 2Hz to 500kHz (input band limited)
VU Meter: Professional moving coil VU, wide range -33dB 18dB
Signal LED's: Peak capture, blue=0dB, red=20dB
High Cut Filter: -3dB at 4kHz minimum phase design
Polarity reverse (phase): All outputs relay switched (including isolated output)
Tone Shape: Ten "passive" voices for improved clarity, problem solving and musical enhancement
AC power: Internal toroidal AC supply, dual wattage, 115 or 230v selectable 50/60Hz, 35w max
Dimensions: 8.5 x 3.5 x 12 in (216 x 88 x 305mm)