Pyboard V1.1-CN MicroPython Programming/STM32/MCU Embedded

Welcome To My Shop : Budayakan Membaca Sebelum Membeli Barang Yang Anda Lihat Ini Barang PO (Pre-Order) Produk Import ( Luar Negri ) Pengiriman Super Cepat, Kebanyakan Barang Yang Kami Kirimkan 7-12 Hari Sudah Sampai Packing Aman dan Secure Produk Original Harap Chat Terlebih Dahulu Sebelum Order Untuk Ketersedian Barang DiGudang Import Happy Shopping ! Pyboard V1.1-CN MicroPython Programming/STM32/MCU Embedded Experimental Development Board More document click to sownload: http://docs.micropython.01studio.org/zh_CN/latest/pyboard/quickref.htmlOverview: Micropyton refers to the micro controller using the Python programming language, learn a single-chip microcomputer and embedded development friend should know early microcontroller using assembly language to programming, with the development of the microprocessor, then gradually replaced by C now microprocessor integration is becoming more and more high, so we can use now- Python language to develop.That is, the embedded hardware functionality that used to take days to write can now be solved in just a few minutes or even a few lines of code based on MicroPython. Life is short. I use Python and MicroPy thon. Pin Instructions: V+: 3.6v-6v input (when plugged into USB, it is powered by USB, the voltage is 5V, it is recommended to use USB port for power supply)3V3: 3.3v output, maximum current 250mVVBAT: lithium battery input (onboard FET protection circuit, xh-2.54 2P interface on the back)VBAT: backup batteryA3V3: analog reference voltage, connected to 3V3X9/X10: when using onboard triaxial acceleration timing is in 12C modeX17: when the USR key is pressed, the X17 will connect to GND through a 4.7k resistanceP2-p5: connect 4 LEDs and light up with high level output 10SD sw :A8 to check if SD card is inserted to switchMma-int :B2 is used to receive interrupts generated by onboard NS - 1613758