iRig Nano Amp The versatile with built-in iOS interface hh

What if you could carry in the palm of your hand a guitar amp that had access to virtually any guitar sound you can imagine? And what if you could drive a 4x12" cab with it with no additional gear needed? Now you can with the new iRig Nano Amp — the first micro guitar amp and interface for the mobile guitarist.

Dual Mode Operation — AMP/DEVICE
iRig Nano Amp operates as a straight up guitar amp and features a British tone stack circuit with gain and volume controls for practice on the go. Simply plug in your guitar to the 1/4" guitar input, adjust your volume and gain settings, select the output type NORMAL/BRIGHT and rock out anywhere you happen to be. The British tone circuit delivers sparkling clean tones at lower gain settings and a cascading wave of overdrive when cranking the gain to the upper limits.

Speaker: 1x3"
Amp: 3W class A/B power amp
Input Impedance: 380 kOhms
Output Impedance: can drive cabinets of different impedances - from 8 to 16 Ohms
Instrument Input Connection: 1/4" Jack
Cabinet Output Connection: 1/4" Jack
iOS Device Connection: 1/8" TRRS Jack
Headphone Output Connection: 1/8" Jack
Power: battery power (3xAA included)
Battery Life: battery life varies by a considerable amount depending on the battery type and amp usage.
Under normal playing conditions and using high quality Alkaline or Ni-MH rechargeable cells, battery life will be approximately 30 hours. In totally idle conditions (amp powered up but not playing) battery life is approx 150 hours, under continuous playing at full power it is about 8 hours.
Important: the amp switches on when the guitar jack is inserted, so always remember to disconnect the guitar input jack from the amplifier when you are not playing to save battery life.
Package includes
iRig Nano Amp
1/8" TRRS jack
3xAA batteries
Dimensions
Size: 159mm/6.26" x 89mm/3.5" x 45mm/1.77"