5.0/ 5.0
100% pembeli merasa puas
1 rating • 0 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 7
Subtotal
Rp787.000
RO Membrane Air Kita 300 GPD
Rp787.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Filter Air
RO Membrane Air Kita 300 GPD
USAGE
It is widely applicable to household water purification, direct drinking in
building or office and other small water purification equipment etc.
SPECIFICATIONS & PARAMETERS
Model Active Membrane Area ft2(m2) Permeate Flow GPD(T/D) Stable Rejection Rate
(%) Min. Rejection Rate (%)
RO-3012-300 141.30 3001.14 98 96
STANDARD TEST CONDITION
Concentration of Solution (NaCl) Temperature pH Value Operating Pressure
psi(MPa) Recovery Rate %
250ppm 25 7.5-8 600.41 400/600-1000.69 15
Notes: The permeate flow of single membrane element may vary with in 15%.
Operating Limits and Conditions of Membrane Element:
Max.Working Pressure 300 psi(2.07MPa)
Max. FeedWater Temperature 45
Max. Feed Water SDI15 5.0
Free Chlorine Concentration of FeedWater 0.1mg/L
pH Range of Feed Water During Continuous Operation 3-10
pH Range of Feed Water During Chemical Cleaning 2-12
Max. Pressure Drop of Single Membrane Element 10psi(0.07Mpa)
USAGE
It is widely applicable to household water purification, direct drinking in
building or office and other small water purification equipment etc.
SPECIFICATIONS & PARAMETERS
Model Active Membrane Area ft2(m2) Permeate Flow GPD(T/D) Stable Rejection Rate
(%) Min. Rejection Rate (%)
RO-3012-300 141.30 3001.14 98 96
STANDARD TEST CONDITION
Concentration of Solution (NaCl) Temperature pH Value Operating Pressure
psi(MPa) Recovery Rate %
250ppm 25 7.5-8 600.41 400/600-1000.69 15
Notes: The permeate flow of single membrane element may vary with in 15%.
Operating Limits and Conditions of Membrane Element:
Max.Working Pressure 300 psi(2.07MPa)
Max. FeedWater Temperature 45
Max. Feed Water SDI15 5.0
Free Chlorine Concentration of FeedWater 0.1mg/L
pH Range of Feed Water During Continuous Operation 3-10
pH Range of Feed Water During Chemical Cleaning 2-12
Max. Pressure Drop of Single Membrane Element 10psi(0.07Mpa)
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan