IR 4 WAY INFRARED TRACKING LINE SENSOR MODULE ARDUINO SMART CAR

4 infrared multi-channel detection system includes probe 4 + 1 control board + DuPont Kabel 18. Sangat berguna untuk aplikasi smartcar. Features: Infrared emission phototube of each channel sensor is giving off infra-red, when infrared ray is not reflected back or intensity is not enough, the infrared receiving phototube is off, TTL output high level, diodes light is off; When objection is in the range of detection, infrared ray is reflected back or intensity is enough, TTL output is low level, diodes light is on. Specification: Working voltage: DC 3.3V~5V; Current: Above 1A; Working Temp: -10~50 centigrade; Installation hole: M3 screw; Detection range: 1mm~60cm(adjustable), the shorter the distance, the better the performance; Sensor size: 25 x 11 x 10mm; VCC,GND: corresponding power supply terminals; DO1, DO2, DO3, DO4: corresponding output terminals. Application: This module is designed for smart car, robot and automated machines; It provides a kind of multifunction infrared detective system for automation; this module adopts infrared transmitter amp; receiver and components as a collision detector. Packing List: 1 x Controller 4 x Sensor modules 12 x jumper cables (20cm) Dimensions: 1.73 in x 1.38 in x 0.28 in (4.4 cm x 3.5 cm x 0.7 cm) Weight: 0.74 oz (21 g) Specifications: 1. Operating voltage: DC 3.3V-5V 2. Operating current: try to select more than 1A power supply 3. Operating temperature: -10 - +50 4. Installation aperture: M3 screws 5. Detection distance: 1mm to 60 CM adjustable, the closer the performance of the more stable, white reflection distance furthest. 6. Size: central control board 4.4mm 4.0mm 12mm (length width height) Small plate forward 25mm 12mm 12mm (length width height) 7. Output interface: 6-wire interface (1234 for the 4-way signal output, + is a positive power supply, is a negative power supply