Atur jumlah dan catatan
Stok Total: 300
Subtotal
Rp42.000
GY-6500 MPU6500 6-Axis Motion Sensor Gyroscope/Accelerometer I2C (**)
Rp42.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Hi #RekanEasyWare ...
The MPU-9250 also features an embedded temperature sensor. This module includes pull-up resistors on the SDA, SCL, and nCS lines, pull-down resistors on the FSYNC and AD0 lines, and an onboard 3.3V voltage regulator allowing you to power the module from 5V sources such as an Arduino. If you desire to power the module from 3.3V you can bridge the solder jumper next to the voltage regulator to bypass the regulator.
Fitur:
- Acceleration and Gyroscope
- 6 DOF module
- Build-in ultra-low noise linear LDO voltage regulator.
- Built-in onboard filters, which reduce noise from the motor and other high current electronics.
- All sensors are connected to the I2C bus.
- Build-in the Logic level converter for I2C.
- Power indicator LED.
- Using Immersion Gold PCB, machine welding process to ensure quality.
- On-board pull-up resistors on SDA, SCL, and nCS
- On-board pull-down resistors on FSYNC and AD0
Spesifikasi:
- Power Supply: 4.4 to 6.5 V or 3.3V (if you solder the jumper near the on-board voltage regulator)
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Degree of Freedom (DOF): 6
- Interface: I2C
- Size: 22x17mm
Kelengkapan:
- 1x Jumper Header(Unsoldered)
The MPU-9250 also features an embedded temperature sensor. This module includes pull-up resistors on the SDA, SCL, and nCS lines, pull-down resistors on the FSYNC and AD0 lines, and an onboard 3.3V voltage regulator allowing you to power the module from 5V sources such as an Arduino. If you desire to power the module from 3.3V you can bridge the solder jumper next to the voltage regulator to bypass the regulator.
Fitur:
- Acceleration and Gyroscope
- 6 DOF module
- Build-in ultra-low noise linear LDO voltage regulator.
- Built-in onboard filters, which reduce noise from the motor and other high current electronics.
- All sensors are connected to the I2C bus.
- Build-in the Logic level converter for I2C.
- Power indicator LED.
- Using Immersion Gold PCB, machine welding process to ensure quality.
- On-board pull-up resistors on SDA, SCL, and nCS
- On-board pull-down resistors on FSYNC and AD0
Spesifikasi:
- Power Supply: 4.4 to 6.5 V or 3.3V (if you solder the jumper near the on-board voltage regulator)
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Degree of Freedom (DOF): 6
- Interface: I2C
- Size: 22x17mm
Kelengkapan:
- 1x Jumper Header(Unsoldered)
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan