NEW Color Recognition Sensor TCS230 TCS3200 Sensor pengenal Warna Arduino READY

TELITI SEBELUM MEMBELI COLOR SENSOR MODULE TCS230 adalah module sensor yang dapat mendeteksi / mengenali warna, sangat cocok dihubungkann ke Arduino atau Minsys lainnya untuk project2 anda! Penjelasan resmi: Designed around 4 White LEDs and the TAOS TCS230 sensor IC. The four white LEDs to provide a broad spectrum light source. The TCS230 has an 8 x 8 array of photodiodes with color filters (16 Red, 16 Blue, 16 Green, 16 Clear). A light to frequency converter generates a 50% duty cycle square wave on the output pin. The color selects (S2, S3), frequency scale (S0, S1) and output are TTL logic level and can be connected directly to the micro controller. duino Basic readings are easy using the Arduino pulsein command. Take a reading for each color. The reading with narrowest pulse width or highest frequency is the major color. Using advanced ratio analysis almost any color could be recognized. Spesifikasi: Sensor IC: TAOS TCS230 Power: 2.7 5VDC Current: gt;30mA @ 5V Input: TTL Logic Levels Sensor Bandwidth: ~400nm to 950nm Output: TTL Level Square Wave (50% Duty Cycle), ~2Hz max Dark / 24KHz Max NOTE: The OE pin (Output Enable ) is grounded through R8 (0ohm), making the module enabled by default. Do not connect the OE to the micro controller, unless R8 is removed or changed to 4.7K or greater. barang jaminan kualitas tinggi