4-Way 12V Relay Modu With Optocoupr Isolation Support

4-way 12V relay modu with optocoupr isolation support Kami Menyediakan Barang yang Anda Butuhkan - Item tersedia - Buka 24 jam, kec admin lagi ketiduran - Hub Kami Untuk Menanyakan varian Barang - Pengiriman pat 6-15 hari sai Model Number : 4-way relay with optocoupr isolation Modu description: 1. The modu uses nuine high-quality relays. The maximum load of the normally open interfa: AC 250V / 10A, DC 30V / 10A; 2.SMD optocoupr isolation, strong driving ability and stab performan; trigr current 5mA; 3, the modu working volta is 5V, 9, 12V, 24V to choose from; 4. Each channel of the modu can be trigred by setting high or low vel through jumpers; 5, fault-torant design, even if the control line is broken, the relay will not operate; 6. Power indicator (green), 4-way relay status indicator (red) 7. The interfa design is user-friendly, all interfas can be directly d out through the terminal block, which is very convenient 8. Modu size: 73mm * 50mm * 18.5mm (ngth * width * height) 9, with 4 fixing bolt hos, 3.1mm hos, pitch 67mm * 44.5mm Modu interfa: 1. DC +: Connect to the positive po of the power supply (the volta is according to the relay requirements, there are 5V.9V.12V and 24V options) 2. DC-: connect to the negative po of the power supply 3. IN1-IN4: According to the setting of each channel, the corresponding relay can be controld to be activated at high or low vel. Relay output: 12-wire interfa, all interfas can be directly connected and d out, which is convenient for users 1. NO1--NO4: relay normally open interfa, the relay is suspended before the pull-in, shorted to COM after the pull-in 2.COM1--COM4 relay common HM74305