Raspberry Pi 5 UPS HAT E 4-Port For 21700-Li-Battery (NOT includ) 5V6A Uninterruptible Power Supply

Brand Name : spotpear
Origin : Mainland China
Accessory Type : Extension Board
Compatible With : Raspberry Pi
Hign-concerned Chemical : None
Note
[] Do
not
include 21700 Battery
[]
DangerousReverse
connect the battery. Will
cause Fire
[] Before installing the battery, ensure that the direction of the battery is correct
Overview
[] UPS HAT (E) For Raspberry Pi, Supports 4 21700 Li Batteries (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Features At A Glance
[]
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for the Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
[]Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+
[]Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power
[]Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters.
[]Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time
[]Supports 4 21700 Li batteries (NOT included), larger capacity and longer battery life
[]Onboard high-power buck chip for stable 5V 6A power output
[]Onboard MCU management, supports detecting power connection and booting the Raspberry Pi
[]Supports displaying battery level on the system, easy to check the operating state of the HAT
[]Comes with online development resources and manual
Specifications
[]
CONTROL BUS : I2C
[]BATTERY SUPPORT : 21700 Li battery 4 (in series, NOT included)
[]TYOE-C POWER : Bi-directional input/output fast charging protocol, up to 40W charging power
[]OUTPUT POWER : 5V 6A
[]DIMENSIONS : 56 88mm
[]MOUNTING HOLE SIZE : 3.0mm
Uninterruptible Power
[]
It is able to charge the batteries and provide power output at the same time from external power supply
[]Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble
[]
* for reference only, please refer to the Package Content for the detailed part list
Supports 21700 Large Capacity Li Battery,Longer Battery Life
[] Onboard Warning Indicators, Easy To Check If The Battery Is Connected Correctly
[]
* for reference only, the 21700 batteries are NOT included
[]
Do not connect the recharger if the indicator lights up, otherwise the protection circuit will be broken down.
Onbaord USB Interfaces
[] Adopts USB Type-C Interface, Supports Multiple Input/Output Protocols. Supports 5V, 9V, 12V, 15V, 20V Input Voltage, Up To 40W Charging Power. Onboard USB Type-A Interface For 5V Power Output, More Convenient For Powering Other Boards
[]
* for reference only, the Raspberry Pi 5 Official 27W USB-C power supply is NOT included.
Pogo Pins Connector
[]
Powering The Raspberry Pi Via Pogo Pins, Without Using Any GPIO Resource,
[]Compatible With Raspberry Pi 5 / 4B / 3B+, Etc.
[]* for reference only, the 21700 batteries are NOT included
Real Time Monitoring
[] Monitoring The Type-C Port And Batteries Voltage, Current, Power, And Remaining Capacity Via I2C
Supports Battery Level Display AndDetecting Power Connection
[] Easy To Check The Battery Status In Real-Time, And Automatically Shutdown When The Battery Level Is Low. Supports Detecting Power Connection And Automatically Rebooting The Raspberry Pi
Outline Dimensions
Package Contains
Notinclude Raspberry PI and 21700-Li-Battery.
[]UPS-HAT-(E) x1