Atur jumlah dan catatan
Stok Total: 161
Subtotal
Rp1.046.500
High And Low Liquid Level Intelligent Controller With 2 Non-contact Sensor Module Automatic Control Liquid Water Level My02 19
Rp1.046.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
When the liquid level is too low, the liquid level sensor sends out the low level alarm signal, and the pump starts automatically and adds liquid level. On the contrary, the pump stops automatically when the liquid level is too high. In this way, the function of automatic control of liquid level of container is realized.
Feature:
1>. Strong compatibility, can be used in conjunction with a variety of liquid level sensor
2>. Strong protection, with proof pump idling protection and overflow detection output, with 4 hours overtime pumping alarm
3>. Relay dry node output, can be applied to a variety of load control
4>. Control of diversification, manual or automatic mode control of pump
5>. The installation is simple and convenient, the screw can be positioned and installed, and the electric box track can also be installed
Function:
1>. Water level automatic control: is lower than the low position induction probe, automatically start the pump, the rises to high level, and automatically closes the pump
2>. Idling delay pump: after starting, if the supply pipe is detected without , then delay 3-5 minutes to close the pump. During the pumping process, if the stopped for more than 3 seconds, the pump was closed immediately
3>. Automatic tracking source: after idling pump stop, start pumping once every two hours, until the is full, pump stops
4>. Manual automatic switching: press K1 button to switch mode of work, red light to automatic mode, kill mode is manual mode
Application: Suitable for controlling radiotube, pumps, etc, as it can achieve the automatic control of high and low as well as keep level stable.
Specification:
Material: ABS
Type: Liquid Level Controller
Package Size: 19 x 11 x 5cm(7.48 x 4.33 x 21.65in)
Quantity: 1 Pc
Electricity Parameters:
Input Voltage: AV100V-220V,50/60Hz
Operating Voltage: DC12V
Operating Current:
Working current<=110mA,
Static consumption current<=20mA
Alarm Output: 800W (Resistive Load) Frequent
Feature:
1>. Strong compatibility, can be used in conjunction with a variety of liquid level sensor
2>. Strong protection, with proof pump idling protection and overflow detection output, with 4 hours overtime pumping alarm
3>. Relay dry node output, can be applied to a variety of load control
4>. Control of diversification, manual or automatic mode control of pump
5>. The installation is simple and convenient, the screw can be positioned and installed, and the electric box track can also be installed
Function:
1>. Water level automatic control: is lower than the low position induction probe, automatically start the pump, the rises to high level, and automatically closes the pump
2>. Idling delay pump: after starting, if the supply pipe is detected without , then delay 3-5 minutes to close the pump. During the pumping process, if the stopped for more than 3 seconds, the pump was closed immediately
3>. Automatic tracking source: after idling pump stop, start pumping once every two hours, until the is full, pump stops
4>. Manual automatic switching: press K1 button to switch mode of work, red light to automatic mode, kill mode is manual mode
Application: Suitable for controlling radiotube, pumps, etc, as it can achieve the automatic control of high and low as well as keep level stable.
Specification:
Material: ABS
Type: Liquid Level Controller
Package Size: 19 x 11 x 5cm(7.48 x 4.33 x 21.65in)
Quantity: 1 Pc
Electricity Parameters:
Input Voltage: AV100V-220V,50/60Hz
Operating Voltage: DC12V
Operating Current:
Working current<=110mA,
Static consumption current<=20mA
Alarm Output: 800W (Resistive Load) Frequent
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan