Sensor Ultrasonic Module Modul Sensor Ultrasonik DC 2.4-5V US-100 5Pin

Deskripsi Singkat: The module is improved, the module itself has been with temperature compensation. US-100 ultrasonic ranging module can realize 2 cm ~ 4.5 m non-contact ranging function, with a 2.4 ~ 5.5 V of wide voltage input range, static power consumption less than 2 mA, bring their own temperature sensor calibration on the ranging results, and has GPIO, serial ports and so on many kinds of communication mode, inside take watchdog, stable and reliable. Product parameters: Operating voltage: DC 2.4V~5.5V Quiescent current: 2mA Working temperature: -20~+70 degrees Output method: level or UART (jumper cap selection) Sensing angle: less than 15 degrees Detection distance: 2cm-450cm Detection accuracy: 0.3cm + 1% Serial port configuration in UART mode: baud rate 9600, start bit,One stop bit, 8 data bits, no parity, no flow control. Pin 1: Connect to VCC power supply (DC 2.4V-5.5V). Pin No.2: When in the UART mode, connect the TX terminal of the external circuit UART; when in the level trigger mode, connect the Trig terminal of the external circuit. Pin No. 3: When in UART mode, connect the RX side of the external circuit UART; when in level-triggered mode, connect the Echo side of the external circuit. Pin No. 5 on the 4th: Connect the ground of the external circuit and turn on the two pins.