Li ion BMS Protection Balanced Board 3.7V Cells 3S 4S 12V 6S 7S 24V 10S 36V 13S 14S 48V 16S 17S 60V 18S 20S 21S 72V 30A 50A 100A

Li ion BMS Protection Balanced Board 3.7V Cells 3S 4S 12V 6S 7S 24V 10S 36V 13S 14S 48V 16S 17S 60V 18S 20S 21S 72V 30A 50A 100A
1005004417136992

Pre-Order +/- Sampai Alamat 10-15 Hari
FREE ONGKIR+PAJAK
Garansi uang kembali jika Rusak, Beda Produk

aliexpress
This sell of the BMS is for li ion battery 3S / 4S / 6S /7S / 10S / 13S / 14S / 16S / 17S / 18S / 20S / 21S,

batteries including LiPo / LMO / Ternary Lithium and so on mark the voltage rated as 3.7V or 3.6V.

and the li ion cells of the exterior 14500 / 18650 / 21700 / 26650 / 32650 / blade battery cell / monomer battery etc.

Must read before buying

1. BMS is used to lithium battery pack, different batteries connected in series are not compatible.

2. E.g: 13S BMS, can't be used to 12S batteries connected in series battery pack, must be used on 13S' batteries connected in series lithium battery pack.

3. And Li-ion(cells marked the voltage rated as 3.7V or 3.6V) battery BMS can't be used to LiFePo4(cells marked the voltage rated as 3.2V) battery,it must be used on LiPo / Ternary Lithium etc marked the voltage rated as 3.7V or 3.6V batteris.

Brief Introduction

About Lithium Battery: Li-ion battery nominal voltage is 3.6V, 3.7V, Lifepo4 battery nominal voltage is 3.2V lithium battery,and LTO battery nominal voltage is 3.2V lithium battery (including 18650, 26650, polymer battery etc.).

BMS Function: Overcharge protection function, over discharge protection function, over current protection function, short circuit protection function, battery balanced function, temperature protection function.

BMS Products: 7S or more adopts integrated scheme circuit, and 7S or less adopts single-section cascade scheme circuit.

* Can be used but not limited to the above examples

This picture based on 13S 48V 60A as example

Note: The MOS of the low-amperage protection board is installed on one side, and the alumi