Raspberry Pi Pico - HM01B0 QVGA SPI Camera Module Arducam

Arducam HM01B0 is a camera module featuring ultra low power consumption, up to QVGA resolution, 1-bit video data interface and line sync. This, along with other specs make it a perfect camera for building machine vision projects and Always on Serivce applications with energy-efficient MCUs. It’s designed specifically for Raspberry Pi Pico and other third party RP2040 dev boards. It’s also the built-in camera of the Arducam Pico4ML.
Application :
- Machine Vision
- Robotics
- IoT

Specs :
• Ultra Low Power Image Sensor designed for Always-on vision devices and applications
• High sensitivity 3.6μ BrightSenseTM pixel technology
• 324 x 324 active pixel resolution with support for QVGA window, vertical flip and horizontal mirror readout
• <1.1mW QQVGA resolution at 30FPS, < 2mW QVGA resolution at 30FPS
• Programmable black level calibration target, frame size, frame rate, exposure, analog gain (up to 8x) and digital gain (up to 4x)
•  Automatic exposure and gain control loop with support for 50 / 60Hz flicker avoidance
• Flexible 1-bit, 4-bit and 8-bit video data interface with video frame and line sync
•  Motion Detection circuit with programmable ROI and detection threshold with digital output to serve as an interrupt
• On-chip self oscillator
• I2C 2-wire serial interface for register access
• CSP and Bare Die sensor package option
• High CRA for low profile module design

Sources :
https://www.arducam.com/docs/pico/arducam-camera-module-for-raspberry-pi-pico/arducam-hm01b0-qvga-camera-module-for-raspberry-pi-pico/


Raspberry Pi Pico
https://www.tokopedia.com/raspberrypi/raspberry-pi-rp2040-pico