HOBO MX CO2 Data Logger MX1102A | Data Logger Suhu dan Co2

Overview Onsets HOBO MX1102 CO2 logger makes it more convenient than ever to measure and record CO2 in buildings and other non-condensing environments. It measures CO2 from 0 5,000 parts per million (ppm) and our free HOBOmobile app* allows you to access data right from your mobile phone or tablet within a 100-foot range. Temperature Sensor Range: 0 to 50C (32 to 122F) Accuracy: 0.21C from 0 to 50C (0.38F from 32 to 122F) Resolution: 0.024C at 25C (0.04F at 77F) Drift: 0 .1C (0.18F) per year RH Sensor Range: 1% to 70% RH when CO2 sensor is enabled (non-condensing) 1% to 90% RH when CO2 sensor is disabled (non-condensing) Accuracy: 2% from 20% to 80% typical to a maximum of 4.5% including hysteresis at 25C (77F); below 20% and above 80% 6% typical Resolution: 0.01% Drift: 1 % per year typical CO2 Sensor Range: 0 to 5,000 ppm Accuracy: 50 ppm 5% of reading at 25C (77F), less than 70% RH and 1,013 mbar Warm-up Time: 15 seconds Calibration: Auto or manual to 400 ppm Non-linearity: 1 % of FS Pressure Dependence: 0.13% of reading per mm Hg (corrected via user input for elevation/altitude) Operating Pressure Range: 950 to 1,050 mbar (use Altitude Compensation for outside of this range) Compensated Pressure Range: -305 to 5,486 m (-1,000 to 18,000 ft) Sensing Method: Non-dispersive infrared (NDIR) absorption Response Time Temperature: 12 minutes to 90% in airflow of 1 m/s (2.2 mph) RH: 1 minute to 90% in airflow of 1 m/s (2.2 mph) CO2: 1 minute to 90% in airflow of 1 m/s (2.2 mph) Logger Radio Power: 1 mW (0 dBm) Transmission Range: Approximately 30.5 m (100 ft) line-of-sight Wireless Data Standard: Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0) Logger Operating Range: 0 to 50C (32 to 122F); 0 to 95% RH (non-condensing) Logging Rate: 1 second to 18 hours Battery Life: 6 months