Water Level Sensor Bluetooth 4m(13’) MX2001-04-SS

The MX2001 Water Level Sensor is used with the HOBO Bluetooth Low Energy Water Level Data Logger (MX2001), the HOBO MicroRX Water Level Stations (RX2103 and RX2104), and the HOBO RX3000 Remote Monitoring Station for accurate water pressure, temperature, and water level measurements. These sensors are available in four depth ranges, as well as in stainless steel or titanium (recommended for use in saltwater). Features - Non-vented design reduces maintenance - Durable, ceramic sensor can withstand freezing - 3-point NIST-traceable calibration certificate This operates in an water environment. The supports the following measurements: Barometric Pressure, Remote Water Level Monitoring, Water Level, Water Pressure and Water Temperature Operation Range : 0 to 145 kPa (0 to 21 psia); approximately 0 to 4 m (0 to 13 ft) of water depth at sea level, or 0 to 7 m (0 to 23 ft) of water at 3,000 m (10,000 ft) of altitude Factory Calibrated Range : 69 to 145 kPa (10 to 21 psia), 0 to 40C (32 to 104F) Burst Pressure : 310 kPa (45 psia) or 18 m (60 ft) depth Water Level Accuracy* : Typical error: 0.075% FS, 0.3 cm (0.01 ft) water Maximum error : 0.15% FS, 0.6 cm (0.02 ft) water Raw Pressure Accuracy** : 0.3% FS, 0.43 kPa (0.063 psi) maximum error Resolution : lt;0.014 kPa (0.002 psi), 0.14 cm (0.005 ft) water Pressure Response Time (90%)*** : lt;1 second at a stable temperature