Bola Sepak Hybrid Football Fifa Basic F500 size 5 White

8619218 8619219 8576136 8576137 8790036 8790035 8790034 Description Need a ball for your football club? With the FIFA Basic Club ball, you get 2 layers of foam, making it more comfortable, and invisible seams for durability. We have designed the FIFA-approved Club Hybrid ball, which pairs comfort with durability, for your training sessions and competitions. durability Scored 2.27 in a standardised test. Seams on the inside. lasting air retention 11% pressure loss in 14 days. stable flight Scored 5.96 in a standardised test. Classic 32 panels. bounce Your ball complies with FIFA requirements in terms of bounce. Our design team created this hybrid ball after observing football players in action on the pitch. This ball is a hybrid because its design combines the comfort of a machine-stitched ball with the durability of a hand-sewn one (the seams are on the inside). We #39;ve also used a special bladder (2 km of thread is wrapped around it) to ensure lasting inflation and better sphericity. The durability of our balls We #39;ve developed a tool for characterising the durability of our balls. Defects that appear in use are identified and assessed through a series of laboratory tests. These tests enable us to compare the overall strength of our footballs with those available on the market. Our aim: to have the most durable products on the market. Too light? Too heavy? The weight is standardised... This ball weighs between 410 g and 450 g (size 5) and complies with official FIFA standards. FIFA Basic approved. How big is it? What #39;s the circumference? This ball measures between 68.0 cm and 70.0 cm and complies with official FIFA standards. FIFA Basic approved. A round ball? Here #39;s how we test sphericity: Average measured variation: 1.8% max (FIFA Basic certification). We measure the football #39;s sphericity at 4500 different points and then examine any differences. If the discrepancy is greater than 1.8 % (FIFA Basic Standard), our engineers are tasked with improving the sphericity to ensure a consistent bounce. Maximum pressure loss test: here #39;s what we do... Here #39;s how we test pressure loss: We inflate the ball to the recommended pressure (meaning 0.8 bar). 72 hours later, the ball must not have lost more than 15% of its pressure, meaning approx. 0.1 bar (FIFA Basic certification). The pressure after 72 hours must, therefore, be at approx. 0.7 bar. This also means that it is quite normal for a ball to lose pressure after a few days. We #39;ve also tested how much water the ball absorbs... Here #39;s how we test water absorption: We simulate rainy playing conditions in a lab, leaving the ball to sit in 2 cm of water on a pivoting support whilst subjecting it to 250 compressions. At the end of the test, the ball must have absorbed no more than 15% of its weight (FIFA Basic certification). Its all about the bounce Here #39;s the bounce test: The ball is dropped onto a steel plate 10 times from a height of 2 metres. The bounce height must be between 125 and 155 cm with a maximum difference of 10 cm between the ball #39;s highest and lowest bounce. Not even a scratch! The most stringent test we put this ball through is the shooting machine test. The ball must resist 2,500 shoots against a concrete slope at 50 km/h at a distance of 2.5 m. At the end of the test, we check: - the ball #39;s general state: stitching must withstand this test - the circumference: It must not have increased more than 1.5 cm.- the sphericity: it must not have varied by over 1.8% - the pressure: loss of pressure must not exceed 12.5%. Product composition Outer shell: 100.0% Polyurethane Foam: 100.0% Ethylene Vinyl Acetate Bladder: 70.0% Dry Rubber, 30.0% Bromo Isobutylene Isoprene Rubber Laminated fabric: 100.0% Polyester Restrictions of use Avoid contact with prickly objects or materials. Storage Advice After use, store your ball in a dry and ventilated place.