Pompa Perahu Kayak High Pressure Hand Pump Stand Up Paddle 20 psi Blac

8543028 Our team has refined the diameter of the piston to reduce the force needed for inflation. 15 psi with this pump is equivalent to 11 psi with a classic pump. The double-action high-pressure pump is designed to easily inflate SUPs or kayaks to pressures of up to 20 PSI. DEFLATE mode can also be used to optimise the storage of the inflatable Ease of use 2 MODES mode 1: inflation (0-8 PSI) mode 2: pressurisation (8-20 PSI) Versatility Can be used to inflate and deflate your inflatable Parameter measurement Built-in 3-20 PSI pressure gauge. Accurate from 3 PSI. Ergonomic grip Wide feet for maximum stability. Ergonomic handles for comfort. Compact design Clip-on hose for easy transport and storage. Robustness Heavy-duty hose with rotating head to prevent disconnecting during inflation. Directions for use 1/ Stand on level and solid ground 2/ Check that the hose is attached on the INFLATE side 3/ Connect the hose to the inflatable 4/ Turn the orange ring to position 1 5/ Inflate the craft until it becomes difficult (approx. 8 PSI) 6/ Turn the orange ring to position 2 7/ Finish inflating to the recommended pressure. Storage advice Use the 2 fastening clips to attach the hose and pump together. Do not stand on the pump or the hose. Clean off any sand, it can damage the seals. Technical dimensions Height: 60 cm Width: 27 cm Depth: 12 cm Hose length: 100 cm 60 mm diameter piston for easy high-pressure inflation. Easy to inflate for everyone. Pump weight: 1.2 kg Volume of air transferred: Mode 1: 2.1 litres Mode 2: 1.2 litres Supplied with a set of adapters In addition to its standard adapter to inflate your dropstitch SUP or kayak to high pressure, the pump also comes with: a #34;Mini Boston #34; adapter to inflate the kayak seats a #34;Boston #34; adapter to inflate low-pressure kayaks, inflatable air mattresses and tents. A nozzle adapter to inflate certain kitesurfing wings. Product Composition Main part 100% Stainless Steel