Factory Calibrated Electrochemical 0-20ppm Nitrogen Dioxide Sensor I2C&UART interface by Gravity

sensor yang mendeteksi konsentrasi nitrogen dioksida dan mendukung tiga mode keluaran: analog, I2C, dan UART. Probe telah dikalibrasi di pabrik, yang dapat mengukur konsentrasi Nitrogen Dioksida di lingkungan dengan cepat dan akurat. Dapat digunakan secara luas dalam mendeteksi nitrogen dioksida di bidang industri, bawah tanah, dan perlindungan lingkungan. FITUR
Kemampuan anti-interferensi yang kuat
Stabilitas tinggi
Sensitivitas tinggi

APLIKASI
Deteksi nitrogen dioksida industri
Deteksi nitrogen dioksida bawah tanah
Perangkat perlindungan lingkungan

SPESIFIKASI
Gas Deteksi: Nitrogen Dioksida (NO2)
Jangkauan deteksi: 0~20ppm
Tegangan Kerja: 3,3～5,5V DC
Arus Kerja: ＜5mA
Sinyal Output: I2C, UART (0~3V), tegangan analog
Suhu Kerja: -20～50℃
Kelembapan Kerja: 15～90%RH (non-kondensasi)
Suhu Penyimpanan: -20～50℃
Kelembapan Penyimpanan: 15～90%RH (non-kondensasi)
Masa Pakai: >2 tahun (di udara)
Ukuran Pelat Adaptor: 37*32mm
Kompatibilitas: Arduino, ESP32, Raspberry pi

DAFTAR PENGIRIMAN
Gravity: Papan Konversi Sinyal NO2 x1
Probe sensor NO2 x1
Gravity - Kabel 4pin x1

=====

sensor that detects nitrogen dioxide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of Nitrogen Dioxide in the environment. Can be widely used in the detection of nitrogen dioxide in industrial, underground, and environmental protection fields.

FEATURES
Strong anti-interference ability
High stability
High sensitivity

APPLICATIONS
Industrial nitrogen dioxide detection
Underground nitrogen dioxide detection
Environmental protection device

SPECIFICATION
Detection Gas: Nitrogen Dioxide(NO2)
Detection range: 0~20ppm
Working Voltage: 3.3～5.5V DC
Working Current: ＜5mA
Output Signal: I2C, UART (0~3V), analog voltage
Working Temperature: -20～50℃
Working Humidity: 15～90%RH (non-condensing)
Storage Temperature: -20～50℃
Storage Humidity: 15～90%RH (non-condensing)
Lifespan: >2 years (in the air)
Adapter Plate Size: 37*32mm
Compatibility: Arduino, ESP32, Raspberry pi

SHIPPING LIST
Gravity: NO2 Signal Conversion Board x1
NO2 sensor probe x1
Gravity - 4pin Cable x1