factory Calibrated sulfur dioxide SO2 Sensor I2C and UART interface by Gravity

factory Calibrated sulfur dioxide SO2 Sensor I2C and UART interface by Gravity

Ini adalah sensor yang mendeteksi konsentrasi sulfur dioksida dan mendukung tiga mode keluaran: analog, I2C, dan UART. Probe telah dikalibrasi di pabrik, yang dapat mengukur konsentrasi sulfur dioksida di lingkungan dengan cepat dan akurat. Dapat digunakan secara luas dalam mendeteksi sulfur dioksida di bidang industri dan perlindungan lingkungan. FITUR
Kemampuan anti-interferensi yang kuat
Stabilitas tinggi
Sensitivitas tinggi

APLIKASI
Deteksi sulfur dioksida industri
Perangkat perlindungan lingkungan

SPESIFIKASI
Gas Deteksi: Sulfur dioksida (SO2)
Jangkauan deteksi: 0~20ppml
Tegangan Kerja: 3,3～5,5V DC
Arus Kerja: ＜5mA
Sinyal Output: I2C, UART (0~3V), tegangan analog
Suhu Kerja: -20～50℃
Kelembapan Kerja: 15～90%RH (non-kondensasi)
Suhu Penyimpanan: -20～50℃
Kelembapan Penyimpanan: 15～90%RH (non-kondensasi)
Masa Pakai: >2 tahun (di udara)
Ukuran Pelat Adaptor: 37*32mm
Kompatibilitas: Arduino, ESP32, Raspberry pi

DAFTAR PENGIRIMAN
Gravity: Papan Konversi Sinyal SO2 x1
Probe sensor SO2 x1
Gravity - Kabel 4pin x1

--

This is a sensor that detects sulfur dioxide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of sulfur dioxide in the environment. Can be widely used in the detection of sulfur dioxide in industrial and environmental protection fields.

FEATURES
Strong anti-interference ability
High stability
High sensitivity

APPLICATIONS
Industrial sulfur dioxide detection
Environmental protection device

SPECIFICATION
Detection Gas: Sulfur dioxide (SO2)
Detection range: 0~20ppml
Working Voltage: 3.3～5.5V DC
Working Current: ＜5mA
Output Signal: I2C, UART (0~3V), analog voltage
Working Temperature: -20～50℃
Working Humidity: 15～90%RH (non-condensing)
Storage Temperature: -20～50℃
Storage Humidity: 15～90%RH (non-condensing)
Lifespan: >2 years (in the air)
Adapter Plate Size: 37*32mm
Compatibility: Arduino, ESP32, Raspberry pi

SHIPPING LIST
Gravity: SO2 Signal Conversion Board x1
SO2 sensor probe x1
Gravity - 4pin Cable x1