Float Stainless Steel Switch Water Level Sensor - 300mm

Float Stainless Steel Switch Water Level Sensor Work principle The ON and OFF sensor switch is controlled by a float. During installation, the part with the cable is placed at the top while the other end is placed at the bottom. The switch is ON if the buoy is at the bottom, the switch will be OFF if the buoy is at the top (near the cable). Specification: Color: Silver Tone Material: Stainless steel Max Switching Voltage = 100 VDC Max Switching Current: 0.5A Max Resistance: 100mΩ Temperature: -30 ~ +125 Floating Ball Material: SUS304 Body Material: SUS304 Thread Diameter: +/- 10mm Cable length is approximately 30cm Float Ball Size: approx. 28x28mm Feature: This float switch does not contain mercury. and is used to detect the liquid level in the tank, so that this switch can activate pumps, indicators, alarms, or other devices. Simple structure, and easy to install Light weight and simple working principle, but high accuracy. Note: This is just a mechanical switch that can only allow a small current to pass through. Only to be connected to a Microcontroller, PLC or Relay. Don #39;t connect it directly to a motor or heater or pump because it won #39;t be able to handle large currents. If you force it, it will break. Try to use a relay to the motor/heater/pump. Package Contents: 1 x Water tank level switch sensor According to the variant selected This product has the potential to experience an extension of delivery time of 3-4 working days Produk ini berpotensi mengalami perpanjangan waktu kirim 3-4 hari kerja