Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp5.240.000
Vibration Meter Landtek VM-6370 Tester Gauge VM6370 Getaran VM 6370
Rp5.240.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Vibrator Landtek
Ready Stock - Bisa Langsung diorder *
- Vibration Meter dari pabrikan Landtek, memenuhi standard ISO2954
- Mengukur 3 parameter sekaligus: Displacement, Velocity, dan Acceleration
====
Features:
Can display the parameters of displacement, Velocity, and Acceleration simultaneously.
In accordance with ISO 2954, used for periodic measurements, to detect out of balance, misalignment and other mechanical faults in rotating machines.
Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.
Individual high quality accelerometer for accurate and repeatable measurements
Bearing condition monitoring function
Digital LCD display
Lightweight and easy to use
Wide frequency range (10Hz~10kHz) in acceleration mode
Automatic power shut off to conserve power.
AC output socket for headphones and recording (Headphone is optional and not included in the set)
Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface (not included in the set)
Specifications:
Display: 4 digit LCD backlit
Sensor: Piezoelectric Transducer
Accuracy: 5% of reading + 2 digits
Measurement range:
Displacement: 0.001~4.000mm Equivalent Peak~Peak: 0.04~160.0 mil
Acceleration: 0.1~400.0m/s2 Equivalent Peak: 0.3~1312ft/s2; 0.0~40g
Velocity: 0.01~400.0mm/s True RMS: 0.004~16.00 inch/s
Frequency: 5Hz~1kHz
Frequency Range:
Displacement: 10Hz~1kHz
Acceleration: 10Hz~10kHz
Velocity: 10Hz~1kHz
Metric Imperial Conversion
Analogue Output: AC output 0~2.0V peak full scale (load resistance: above 10k)
With Max. value hold and low battery indication
PC interface: RS232C (cable and software not included in the set)
Power off: Manual off at any time or auto power off is enabled by user
Power Supply: 2 x 1.5V AA batteries
- Vibration Meter dari pabrikan Landtek, memenuhi standard ISO2954
- Mengukur 3 parameter sekaligus: Displacement, Velocity, dan Acceleration
====
Features:
Can display the parameters of displacement, Velocity, and Acceleration simultaneously.
In accordance with ISO 2954, used for periodic measurements, to detect out of balance, misalignment and other mechanical faults in rotating machines.
Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.
Individual high quality accelerometer for accurate and repeatable measurements
Bearing condition monitoring function
Digital LCD display
Lightweight and easy to use
Wide frequency range (10Hz~10kHz) in acceleration mode
Automatic power shut off to conserve power.
AC output socket for headphones and recording (Headphone is optional and not included in the set)
Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface (not included in the set)
Specifications:
Display: 4 digit LCD backlit
Sensor: Piezoelectric Transducer
Accuracy: 5% of reading + 2 digits
Measurement range:
Displacement: 0.001~4.000mm Equivalent Peak~Peak: 0.04~160.0 mil
Acceleration: 0.1~400.0m/s2 Equivalent Peak: 0.3~1312ft/s2; 0.0~40g
Velocity: 0.01~400.0mm/s True RMS: 0.004~16.00 inch/s
Frequency: 5Hz~1kHz
Frequency Range:
Displacement: 10Hz~1kHz
Acceleration: 10Hz~10kHz
Velocity: 10Hz~1kHz
Metric Imperial Conversion
Analogue Output: AC output 0~2.0V peak full scale (load resistance: above 10k)
With Max. value hold and low battery indication
PC interface: RS232C (cable and software not included in the set)
Power off: Manual off at any time or auto power off is enabled by user
Power Supply: 2 x 1.5V AA batteries
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan