4.9/ 5.0
99% pembeli merasa puas
114 rating • 31 ulasan
5(109)95.61%
4(4)3.51%
3(1)0.88%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
Modul UPS 12V 9V Baterai 18650 Lithium Pengaman Anti Mati Lampu Always On - 12V
Rp20.000
Pilih output: 12V
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Produk modul dan kit ini TIDAK BERGARANSI, segala resiko kerusakan saat perakitan silakan ditanggung sendiri.
Kami tidak menerima pengembalian dengan alasan apapun, kecuali kekurangan jumlah atau kesalahan jenis barang yang dikirim.
Jika tetap memesan, kami anggap setuju dengan ketentuan tersebut.
Charging requires a minimum input of 5V, and the default charging current is 0.5-0.6A. You don't need to replace the customer's original charger. A jumper can increase the charging speed. If you want accelerated charging, you must replace the customer's original power supply to prevent safety hazards. The power must be at least doubled. For example, if the customer is using a 12V 1.5A power supply, if fast charging is required, it will need to be replaced with a 12V 2.5A-3A power supply. You need to leave more margin because you have no way of knowing whether the power supply quality meets the standards! Please pay attention to this issue!
Product Description:
Input voltage: DC5V-12V (this voltage is the voltage when charging the battery)
Output voltage: DC9V or DC12V optional (the default is 9V, you can also change the jumper to 12V. In addition, the output voltage is the voltage when it is powered by battery only. If there is charging input, the output will be equal to the input)
Output power: MAX 12W
Board size: 50*20*6mm
Please connect the battery as the last step. This is very important. The battery is 3.7V lithium battery or polymer battery.
Battery capacity: 1-3AH (MAX 5AH)
Note: Welding input and output must use at least 20AWG wire, and the wire length should not exceed 10CM
If the input is connected to the output, a loop will be formed, which will consume 0.4-0.6mA current.
Charging indicator light accessory application instructions:
Indicator Light: A red-blue diode with a common anode. The blue light indicates load status; the red light indicates battery charging; it illuminates when charging and turns off when fully charged. A flashing red light indicates a battery abnormality or no battery connection. The indicator light must be configured; it is recommended to use a red and blue indicator for effective operation; other dual-color indicators are ineffective.
Note: The output short circuit of the control board is invalid during charging, so please use this function with caution!
Note: The control board will generate heat when working, so it should be kept at a certain distance from the battery when installing!
Kami tidak menerima pengembalian dengan alasan apapun, kecuali kekurangan jumlah atau kesalahan jenis barang yang dikirim.
Jika tetap memesan, kami anggap setuju dengan ketentuan tersebut.
Charging requires a minimum input of 5V, and the default charging current is 0.5-0.6A. You don't need to replace the customer's original charger. A jumper can increase the charging speed. If you want accelerated charging, you must replace the customer's original power supply to prevent safety hazards. The power must be at least doubled. For example, if the customer is using a 12V 1.5A power supply, if fast charging is required, it will need to be replaced with a 12V 2.5A-3A power supply. You need to leave more margin because you have no way of knowing whether the power supply quality meets the standards! Please pay attention to this issue!
Product Description:
Input voltage: DC5V-12V (this voltage is the voltage when charging the battery)
Output voltage: DC9V or DC12V optional (the default is 9V, you can also change the jumper to 12V. In addition, the output voltage is the voltage when it is powered by battery only. If there is charging input, the output will be equal to the input)
Output power: MAX 12W
Board size: 50*20*6mm
Please connect the battery as the last step. This is very important. The battery is 3.7V lithium battery or polymer battery.
Battery capacity: 1-3AH (MAX 5AH)
Note: Welding input and output must use at least 20AWG wire, and the wire length should not exceed 10CM
If the input is connected to the output, a loop will be formed, which will consume 0.4-0.6mA current.
Charging indicator light accessory application instructions:
Indicator Light: A red-blue diode with a common anode. The blue light indicates load status; the red light indicates battery charging; it illuminates when charging and turns off when fully charged. A flashing red light indicates a battery abnormality or no battery connection. The indicator light must be configured; it is recommended to use a red and blue indicator for effective operation; other dual-color indicators are ineffective.
Note: The output short circuit of the control board is invalid during charging, so please use this function with caution!
Note: The control board will generate heat when working, so it should be kept at a certain distance from the battery when installing!
Ada masalah dengan produk ini?