Atur jumlah dan catatan
Stok Total: 99
Subtotal
Rp972.000
Non Screen LED LCD TV Backlight Bead Tester LED Strip Light Detector LAN-12
Rp972.000
- Kondisi: Baru
- Waktu Preorder: 25 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Non Detachable Screen LED LCD TV Backlight Bead Tester LED Strip Light Detector LAN-12
1005006750280348
? Pre-Order +/- Sampai Alamat 10-15 Hari
? FREE ONGKIR+PAJAK
?? Garansi uang kembali jika Rusak, Beda Produk
Origin : Mainland China
modname=ckeditor
modname=ckeditor
LAN-12
Input voltage: 85-265V (
Output voltage: 0-300V, power 18W.
Output voltage, current automatic detection.
Can test any size LED backlight and lamp beads.
High brightness, no need to remove the screen can judge the quality of the backlight.
Features are as follows:
1, using STM8 high-speed single-chip microcomputer to do voltage sampling test, and drive LED lamp display voltage (not other products on the market to use the purchase of voltmeter head, separate installation) to achieve board integration, reduce the defective rate (due to constant current, only do voltage display function).
2, 0-300V adaptive voltage, suitable for most series parallel lamp bead test. When testing, the gradual starting mode is used, the voltage automatically ADAPTS, the current gradually increases, and the lamp bead is never burned, and the normal brightness can be reached after three to five seconds. The positive and negative poles of the lamp strip and lamp bead are reversed, and the lamp strip and lamp bead are not burned.
3, digital display real-time voltage output, with adjustable voltage, voltage value can be corrected by itself. The digital meter uses a green light tube, and the display of 00 indicates a short circuit, and the display of 300V is an open circuit. The display voltage of each LED strip of the same LCD TV should be the same.
4, hot and cold isolation, never electric shock. Power cord and box integrated design, easy to carry out.
5, you can light the LCD TV screen without removing the screen. (There is a bad lamp bead s
1005006750280348
? Pre-Order +/- Sampai Alamat 10-15 Hari
? FREE ONGKIR+PAJAK
?? Garansi uang kembali jika Rusak, Beda Produk
Origin : Mainland China
modname=ckeditor
modname=ckeditor
LAN-12
Input voltage: 85-265V (
Output voltage: 0-300V, power 18W.
Output voltage, current automatic detection.
Can test any size LED backlight and lamp beads.
High brightness, no need to remove the screen can judge the quality of the backlight.
Features are as follows:
1, using STM8 high-speed single-chip microcomputer to do voltage sampling test, and drive LED lamp display voltage (not other products on the market to use the purchase of voltmeter head, separate installation) to achieve board integration, reduce the defective rate (due to constant current, only do voltage display function).
2, 0-300V adaptive voltage, suitable for most series parallel lamp bead test. When testing, the gradual starting mode is used, the voltage automatically ADAPTS, the current gradually increases, and the lamp bead is never burned, and the normal brightness can be reached after three to five seconds. The positive and negative poles of the lamp strip and lamp bead are reversed, and the lamp strip and lamp bead are not burned.
3, digital display real-time voltage output, with adjustable voltage, voltage value can be corrected by itself. The digital meter uses a green light tube, and the display of 00 indicates a short circuit, and the display of 300V is an open circuit. The display voltage of each LED strip of the same LCD TV should be the same.
4, hot and cold isolation, never electric shock. Power cord and box integrated design, easy to carry out.
5, you can light the LCD TV screen without removing the screen. (There is a bad lamp bead s
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan