PERHATIAN: -Garansi dapat diklaim apabila pembelian "Dengan Garansi" -Pembelian "Tanpa Garansi" tidak dapat diklaim -Garansi berupa penukaran barang atau pengembalian dana -Periode garansi berlangsung selama 5 hari setelah status "Pesanan Tiba Ditujuan"
WeMos D1 Mini ESP32 ESP-32 Development Dev Board Modul Module
Ini adalah Board Mikrokontroler WeMos D1 Mini ESP32. Modul ini cocok untuk berbagai macam proyek Artificial Intelligence (AI) dan juga proyek Internet of Things (IoT).
FITUR LENGKAP DARI WeMos D1 Mini ESP32
-Driver: CP2104 - PCB-mounted antenna - Onboard Micro-USB connector (i.e., USB Micro-B) - SoC: ESP32 FCC certified Wi-Fi and Bluetooth module (ESP-WROOM-32 Module) - USB-to-Serial: Silicon Labs CP2102 USB to UART Bridge - GPIO: 3×UART, 3×SPI, 2×I2S, 18×ADC input channels, 2×DAC output channels, 2×I2C, PWM/timer input/output available on every GPIO pin, OpenOCD debug interface, SDIO master/slave (50 MHz), external SPI flash (up to 16MB), and SD-card interface support - Size: 39mm × 31mm - Voltage Reg.: RT9013 500mA LDO - Power Input: 3.0~5.5VDC - Analog-to-Digital Converter (ADC) – Up to 16 channels of 12-bit SAR ADC’s. The ADC range can be set, in firmware, to either 0-1V, 0-1.4V, 0-2V, or 0-4V – no more weird 0-1V ADC! - Digital-to-Analog Converter (DAC) – Two 8-bit DAC’s to produce true analog voltages - Pulse-Width Modulation (PWM) – Up to 16 channels of PWM-capable pins for dimming LEDs or controlling motors - Touch Sensor – 10 GPIOs feature capacitive sensing; make a 10-key buttonpad!