Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp2.200.000
Nicety CM8806 paint coating thickness gauge digital micron tester Ori
Rp2.200.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Alat ukur ketebalan cat atau coating dari brand Nicety
Mudah dipakai. Bisa mendeteksi secara otomatis base material Ferrous atau Non Ferrous.
Ferrous adalah metal magnetik seperti besi, baja, dll
Non Ferrous adalah metal non magnetik seperti aluminium, aloy, dll.
Mendapatkan calibration set untuk kalibrasi untuk menjaga akurasi
======
Description:
The LCD Digital Coating Thickness Gauge Tester is a combination gauge with two sensors, one for magnetic metals and one for non-magnetic metals. The gauge will automatically switch to the right sensor. It can be used to measure the thickness of protective coatings or paints on machine parts, buildings or materials.
F-PROBE: Magnetic induction: Can measure the thickness of Non-magnetic coating layers On magnetic substrate. Such as: (aluminum, chrome, copper, enamel, rubber, paint) on magnetic substrate (steel, iron, alloy and magnetic stainless steel).
N-PROBE: Eddy current: Can measure the thickness of nonconductive coating layers covered on nonferrous substrate. Such as : ( enamel, rubber, paint, vanish, plastic anodic-oxide layer) covered on nonferrous substrate (aluminum, brass, zinc, tin and nonmagnetic stainless steel).
Fitur:
-Large and clear TFT Screen(160 x 128 TFT)
-Ferrous or Non Ferrous
-Metric/imperial system selectable, Auto power off.
-Single / Continue measurement selectable
-Flip display, Easy Reading at any condition and angle
-99 data memory
-Simultaneously displays 5 readings
-Measuring Reading, Average Reading, Max Reading, Min Reading and Standard Deviation.
-Low battery indication
Spec:
-Range: 0 - 1250um; M, 0 - 50mil
-Principle: F type-magnetic induction, NF type-eddy current
-Resolution: 1um /0.1mils
-Accuracy: +/-(3%+2um) or +/-(3%+0.1mils)
-Modes: Single & Continuous
-Power supply: 2xAAA 1.5V batteries
-Packing: Spectacle case, Bandbox
Ready stock
Pengiriman ekspress
kunjungi toko fisik kami
Mudah dipakai. Bisa mendeteksi secara otomatis base material Ferrous atau Non Ferrous.
Ferrous adalah metal magnetik seperti besi, baja, dll
Non Ferrous adalah metal non magnetik seperti aluminium, aloy, dll.
Mendapatkan calibration set untuk kalibrasi untuk menjaga akurasi
======
Description:
The LCD Digital Coating Thickness Gauge Tester is a combination gauge with two sensors, one for magnetic metals and one for non-magnetic metals. The gauge will automatically switch to the right sensor. It can be used to measure the thickness of protective coatings or paints on machine parts, buildings or materials.
F-PROBE: Magnetic induction: Can measure the thickness of Non-magnetic coating layers On magnetic substrate. Such as: (aluminum, chrome, copper, enamel, rubber, paint) on magnetic substrate (steel, iron, alloy and magnetic stainless steel).
N-PROBE: Eddy current: Can measure the thickness of nonconductive coating layers covered on nonferrous substrate. Such as : ( enamel, rubber, paint, vanish, plastic anodic-oxide layer) covered on nonferrous substrate (aluminum, brass, zinc, tin and nonmagnetic stainless steel).
Fitur:
-Large and clear TFT Screen(160 x 128 TFT)
-Ferrous or Non Ferrous
-Metric/imperial system selectable, Auto power off.
-Single / Continue measurement selectable
-Flip display, Easy Reading at any condition and angle
-99 data memory
-Simultaneously displays 5 readings
-Measuring Reading, Average Reading, Max Reading, Min Reading and Standard Deviation.
-Low battery indication
Spec:
-Range: 0 - 1250um; M, 0 - 50mil
-Principle: F type-magnetic induction, NF type-eddy current
-Resolution: 1um /0.1mils
-Accuracy: +/-(3%+2um) or +/-(3%+0.1mils)
-Modes: Single & Continuous
-Power supply: 2xAAA 1.5V batteries
-Packing: Spectacle case, Bandbox
Ready stock
Pengiriman ekspress
kunjungi toko fisik kami
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan