Specification:
Channel: 2-Channel
Trigger Voltage : Low Level Trigger (0 - 1.5V)
Trigger Mode : Low Level
Protection : Optocoupler Protection Circuit
Voltage : 250 Vac | 125 Vac | 30 Vdc | 28 Vdc
Max Current : 10A
Pin Interface:
1. VCC: Power interface 5V
2. GND: Ground
3. IN: Control interface .Drive Current at least 4mA
4. COM: Control circuit ground ,Connect to GND
Features:
1. With isolation groove in control area and load area.
2. With power and relay action indication, bright when connect and go off when disconnects.
3. When there is a signal in signal input, public side and common side will breakover.
4. It can be not only used as a microcontroller development board module, but also as a home appliance control.
5. It can not only control the DC or AC signal, but the 220V AC load.
6. With a permanent open and close vents contact.
7. It is convenient to connect with blue KF301 terminal access control cable.
Product Category:
Relay Module
link:
https://www.tokopedia.com/supreme/etalase/com-o-relay-module