5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp250.000
Ticket To The Moon Carabiner Hammock Anchors - Wall Attachment Kit
Rp250.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Ticket To The Moon
The TTTM Hanging Kit lets you set up your hammock indoors or wherever you find concrete or stone walls. If you want to install the display on wooden structures, please use the screws directly without the fisher and see description below (as long as your wooden wall is strong enough and suitable for drilling).
Set of 2 hangers with screws, washers and fish plugs.
What you require for the set-up:
1 x drill
1 x 12 mm masonry drill bit (3/8)
1 x 13 mm spanner / wrench
INSTALLATION INSTRUCTIONS:
1) Try to find the right distance between two walls usually a distance from 2.7 - 3 m is perfect without the need for additional ropes.
2) Check the wall by tapping and knocking and see if it is sturdy enough and not just a hollow thin layer of plywood
3) Choose any height from 1.3 m and higher, depending on the distance of your hangers. Make sure to install the anchors higher if they are further away than 3 m otherwise you either dont have the 30 angle for your hammock or you will touch the floor. ;)
4) Drill a hole in a concrete or stone wall with a 10 mm (3/8) boring head. Check the length according to the Bolt included in the Kit. Clean the hole with a brush or blow residual dust out with a straw.
5) Gently insert the fisher first.
6) Insert the lag bolt with the hanger and the washer already threat in, screw the bolt until it is securely tightened.
7) Attach your Rope or Moon Strap to the hanger and use your hammock the way you are used to. Dont attach the aluminum Carabiner directly to the stainless-steel hanger, because it may damage the Carabiner. Start with gently sitting inside your hammock to see if the hangers are installed safely and securely.
Set of 2 hangers with screws, washers and fish plugs.
What you require for the set-up:
1 x drill
1 x 12 mm masonry drill bit (3/8)
1 x 13 mm spanner / wrench
INSTALLATION INSTRUCTIONS:
1) Try to find the right distance between two walls usually a distance from 2.7 - 3 m is perfect without the need for additional ropes.
2) Check the wall by tapping and knocking and see if it is sturdy enough and not just a hollow thin layer of plywood
3) Choose any height from 1.3 m and higher, depending on the distance of your hangers. Make sure to install the anchors higher if they are further away than 3 m otherwise you either dont have the 30 angle for your hammock or you will touch the floor. ;)
4) Drill a hole in a concrete or stone wall with a 10 mm (3/8) boring head. Check the length according to the Bolt included in the Kit. Clean the hole with a brush or blow residual dust out with a straw.
5) Gently insert the fisher first.
6) Insert the lag bolt with the hanger and the washer already threat in, screw the bolt until it is securely tightened.
7) Attach your Rope or Moon Strap to the hanger and use your hammock the way you are used to. Dont attach the aluminum Carabiner directly to the stainless-steel hanger, because it may damage the Carabiner. Start with gently sitting inside your hammock to see if the hangers are installed safely and securely.
Ada masalah dengan produk ini?