Casing Gaming NZXT H510i Matte White

Dimensions W: 210mm H: 435mm D: 428mm (without feet) W: 210mm H: 460mm D: 428mm (with feet) Material(s) SGCC Steel, Tempered Glass Weight 6.8 kg Motherboard Support Mini-ITX, MicroATX, and ATX Front I/O Ports 1x USB 3.1 Gen 2 Type-C 1x USB 3.1 Gen 1 Type-A 1x Headset audio Jack Front I/O internal header 1x USB 3.1 Gen 2 Internal Header 1x USB 3.1 Gen 1 Internal Header 1x USB 2.0 Internal Header 1x HD Audio Header Filters All Air Intakes Smart Device V2 3x Fan channels with Max 10W per channel output* 2x RGB LED port support up to 4x HUE 2 addressable LED strips or 5x Aer RGB or Aer RGB 2 fans Built-in noise detection module *Note: If a splitter is used, fan control is regulated depending on the fan connected to the 4-pin port. Do not use low-noise adapters. LED Strip(s) 2 integrated addressable LED strip Vertical GPU Mount 2 Slots Included Accessories Installation screws 10x Cable ties 1x Headset Audio Jack splitter (4 pole to 3 pole) Drive Bays 2.5”: 2+1 3.5”: 2+1 Expansion Slots 7 Radiator Support Front: 2x 140 or 2x 120mm with Pull Rear: 1x 120mm Fan Support Front: 2 x 120/ 2 x 140mm Top: 1x 120mm/ 1x 140mm (1 Aer F120 Case Version included) Rear: 1x 120mm (1 Aer F120 Case Version included) Fan Specs Aer F120 (Case Version) Speed: 1200 ± 200 RPM Airflow: 50.42 CFM Noise: 28 dBA Bearing: Rifle Bearing Clearance Cable Management: 19-23mm GPU Clearance: Up to 381mm w/o front watercooler installed, up to 325mm with front watercooler installed Vertical GPU Mount Clearance: 40.64mm CPU Cooler: Up to 165mm Front Radiator: 60mm Rear Radiator: 60mm Reservoir amp; Pump: Up to 180mm (Along cable bar), Up to 86mm (Along bottom panel)