4.9/ 5.0
100% pembeli merasa puas
31 rating • 3 ulasan
5(29)93.55%
4(2)6.45%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 15
Subtotal
Rp185.000
TDS Sensor Module Water Quality Detection for Arduino
Rp185.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Sensors
TDS (Total Dissolved Solids),Sensor Module Dissolved Solids Analog Signal Soluble Solid Water Quality Detection DS18B20 Temperature for Arduino 51/STM32 3.3V 5V
Product parameters:
Output signal range: 0~2.3V
Power supply voltage: 3.3~ 5.0V
TDS measurement range: 0~1000ppm
Working current: 3~6mA
TDS measurement accuracy: ±5%F.S. (25C)
Module size: 42mmX 31.2mm
TDS probe interface: 2Pin XH-2.54
Temperature sensor interface: 3Pin XH-2.54
Signal output: 0-2.3V analog signal output, compatible with 5V and 3.3V control systems
Excitation source is AC signal, effectively preventing probe polarization
Waterproof: Waterproof probe can be immersed in water for long-term measurement
TDS probe parameters: TDS probe is suitable for 2 points of PE pipe
Pin description:
The module is connected to the TDS probe through the 2PinXH-2.54 connector, and the DS18B20 temperature sensor interface is extended to facilitate software temperature compensation design.
VCC: supply voltage+
GND: supply voltage-
T1: Temperature sensor DS18B20 signal output port (temperature compensation can be performed through software)
AO: Analog signal output (output voltage range 0-2.3V)
+:Temperature sensor power supply+
T: Temperature sensor signal line
-: Temperature sensor power supply-
1: TDS probe lead 1
2: TDS probe lead 2
Product parameters:
Output signal range: 0~2.3V
Power supply voltage: 3.3~ 5.0V
TDS measurement range: 0~1000ppm
Working current: 3~6mA
TDS measurement accuracy: ±5%F.S. (25C)
Module size: 42mmX 31.2mm
TDS probe interface: 2Pin XH-2.54
Temperature sensor interface: 3Pin XH-2.54
Signal output: 0-2.3V analog signal output, compatible with 5V and 3.3V control systems
Excitation source is AC signal, effectively preventing probe polarization
Waterproof: Waterproof probe can be immersed in water for long-term measurement
TDS probe parameters: TDS probe is suitable for 2 points of PE pipe
Pin description:
The module is connected to the TDS probe through the 2PinXH-2.54 connector, and the DS18B20 temperature sensor interface is extended to facilitate software temperature compensation design.
VCC: supply voltage+
GND: supply voltage-
T1: Temperature sensor DS18B20 signal output port (temperature compensation can be performed through software)
AO: Analog signal output (output voltage range 0-2.3V)
+:Temperature sensor power supply+
T: Temperature sensor signal line
-: Temperature sensor power supply-
1: TDS probe lead 1
2: TDS probe lead 2
Ada masalah dengan produk ini?