4.9/ 5.0
100% pembeli merasa puas
18 rating • 3 ulasan
5(17)94.44%
4(1)5.56%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 13
Subtotal
Rp299.000
High Speed Xilinx Programmer USB Downloader JTAG SMT2 Blaster
Rp299.000
[Garansi 1 Bulan]
The target device download clock can be selected, and the XILINX software can be automatically adjusted
Adopt special wide voltage level conversion and interface chip, the isolation is fully integrated to avoid the burning of the chip caused by the charged plug
Double color LED status indicator, orange indicates that the download and PC connection are normal, green indicates that the target board power supply is already supplied and connected with the loader
Adopt JTAG-SMT2 solution
Package Includes:
1 x Newest platform cable USB
1 x 14-pin 2.54mm pitch 15cm flat cable
1 x USB cable
The Platform Cable USB ,a USB compatible cable for in-circuit configuration and programming of all Xilinx devices.It derives all operating power from the hub port controller. No external power supply is required. A sustained slave-serial FPGA configuration transfer rate of 24 Mb/s is possible in a Hi-Speed USB environment.
Performance:
Using CY7C68013A+XC2C256 solution, fully compatible with the original XILINX Platform Cable USB
Supports all Xilinx devices, FPGA configuration and PROM/CPLD programming
Supports JTAG, Slave-Serial and SPI
Interfaces to devices operating at 5V (TTL), 3.3V (LVCMOS), 2.5V, 1.8V and 1.5V
Selectable target clock frequency, supports software automatic frequency adjustment
Supported on Windows and Red Hat Enterprise Linux
Automatically senses and adapts to target I/O voltage
LED Status Indicator
Target clock speeds are selectable from 750 kHz to 24 MHz.
Supported Software
Xilinx ISE 8 to ISE 14.7 and up-to-date ISE software
Xilinx Vivado
IMPACT
ChipScope
Microblaze embedded processor debugging
Supported Device:
All Xilinx devices, FPGA and PROM/CPLD:
All Virtex-FPGA families
All Spartan-FPGA families
XC9500 / XC9500XL / XC9500XV CPLDs
CoolRunnerXPLA3 / CoolRunner-II CPLDs
XC4000
The target device download clock can be selected, and the XILINX software can be automatically adjusted
Adopt special wide voltage level conversion and interface chip, the isolation is fully integrated to avoid the burning of the chip caused by the charged plug
Double color LED status indicator, orange indicates that the download and PC connection are normal, green indicates that the target board power supply is already supplied and connected with the loader
Adopt JTAG-SMT2 solution
Package Includes:
1 x Newest platform cable USB
1 x 14-pin 2.54mm pitch 15cm flat cable
1 x USB cable
The Platform Cable USB ,a USB compatible cable for in-circuit configuration and programming of all Xilinx devices.It derives all operating power from the hub port controller. No external power supply is required. A sustained slave-serial FPGA configuration transfer rate of 24 Mb/s is possible in a Hi-Speed USB environment.
Performance:
Using CY7C68013A+XC2C256 solution, fully compatible with the original XILINX Platform Cable USB
Supports all Xilinx devices, FPGA configuration and PROM/CPLD programming
Supports JTAG, Slave-Serial and SPI
Interfaces to devices operating at 5V (TTL), 3.3V (LVCMOS), 2.5V, 1.8V and 1.5V
Selectable target clock frequency, supports software automatic frequency adjustment
Supported on Windows and Red Hat Enterprise Linux
Automatically senses and adapts to target I/O voltage
LED Status Indicator
Target clock speeds are selectable from 750 kHz to 24 MHz.
Supported Software
Xilinx ISE 8 to ISE 14.7 and up-to-date ISE software
Xilinx Vivado
IMPACT
ChipScope
Microblaze embedded processor debugging
Supported Device:
All Xilinx devices, FPGA and PROM/CPLD:
All Virtex-FPGA families
All Spartan-FPGA families
XC9500 / XC9500XL / XC9500XV CPLDs
CoolRunnerXPLA3 / CoolRunner-II CPLDs
XC4000
Ada masalah dengan produk ini?