Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp16.768.000
YUSHI 1018 Steel Phased Array Calibration Block Meteric Type NDT Ultra
Rp16.768.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Brief Introduction
Phased Array Calibration Standard Blocks (PACS) are used for angle beam verification, probe angle exit points, calibration for wedge delay, sensitivity and DAC/TCG for thicknesses up to 2".
Metric Version
The three radii (12.5mm, 25mm and 50mm) allow for exit point verification, velocity and sound path calculations. This metric block contains five holes at 1.2mm diameter drilled through the 25mm width, located at 2.5mm, 5.0mm, 10.0mm, 15.0mm, 20.0mm, 30.0mm, 35.0mm, 45.0mm and 47.5mm from the respective scanning surface.
Metric Dimensions: 450mm x 50mm x 25mm
Material: 1018 steel
Listing Including
A calibration block
A suitcase
A certificat selamat berbelanja di toko kami
Phased Array Calibration Standard Blocks (PACS) are used for angle beam verification, probe angle exit points, calibration for wedge delay, sensitivity and DAC/TCG for thicknesses up to 2".
Metric Version
The three radii (12.5mm, 25mm and 50mm) allow for exit point verification, velocity and sound path calculations. This metric block contains five holes at 1.2mm diameter drilled through the 25mm width, located at 2.5mm, 5.0mm, 10.0mm, 15.0mm, 20.0mm, 30.0mm, 35.0mm, 45.0mm and 47.5mm from the respective scanning surface.
Metric Dimensions: 450mm x 50mm x 25mm
Material: 1018 steel
Listing Including
A calibration block
A suitcase
A certificat selamat berbelanja di toko kami
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan