4.9/ 5.0
100% pembeli merasa puas
10 rating • 2 ulasan
5(9)90%
4(1)10%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 99930
Subtotal
Rp6.000
HW-611 BMP 280 3.3V Sensor Tekanan Atmosfer Barometrik
Rp6.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Module Sensor
HW-611 BMP280 3.3V Digital Barometric Pressure Altitude Sensor cukup mudah digunakan, telah dikalibrasi sebelumnya dan tidak memerlukan komponen tambahan. Anda cukup mulai mengukur kelembaban relatif, suhu, tekanan barometrik & kira-kira. ketinggian dalam waktu singkat. Jadi di sini kita hanya akan menghubungkan Sensor Tekanan Barometrik BME280 dengan Arduino dan menampilkan semua parameter yang diukur seperti suhu, tekanan, kelembaban dan ketinggian di Layar LCD 20x4. Anda juga dapat menambahkan Anemometer ke proyek untuk mengukur kecepatan angin.
Bosch BME280 Sensor Kelembaban, Suhu & Tekanan adalah sensor lingkungan terintegrasi yang berukuran sangat kecil dengan konsumsi daya yang rendah. Pemecahan Sensor Atmosfer BME280 ini adalah cara mudah untuk mengukur tekanan barometrik, kelembaban, dan pembacaan suhu, semuanya tanpa menghabiskan terlalu banyak ruang.
Features of BME280
1. Interface: I2C & SPI
2. Supply Voltage: 1.71V to 3.6V
3. Temperature Range: -40 to +85°C
4. Humidity Range: 0% to 100% rel. humidity
5. Pressure Range: 300hPa to 1100hPa
6. Humidity sensor and pressure sensor can be independently enabled/disabled
Applications
1. Context awareness, e.g. skin detection, room change detection
2. Health monitoring/well-being
3. Home automation control
4. Control heating, ventilation, air conditioning (HVAC)
5. Internet of things
6. GPS enhancement & Indoor/Outdoor navigation
7. Weather forecast
8. Vertical velocity indication (rise/sink speed)
Pinout
The BME280 I2C interface uses the following pins:
1. VCC: 1.71V to 3.6V
2. GND: Connect to GND
3. SCL: serial clock (SCK)
4. SDA: Serial data (SDI)
5. CSB: Must be connected to VDDIO to select I2C interface.
6. SDO: The I2C address decides the pin. If SDO connects to GND(0), the address is 0x76, if it connects to VDDIO(1), the address is 0x77. In this module, we have connected it to VDDIO, so the address should be 0x77
Bosch BME280 Sensor Kelembaban, Suhu & Tekanan adalah sensor lingkungan terintegrasi yang berukuran sangat kecil dengan konsumsi daya yang rendah. Pemecahan Sensor Atmosfer BME280 ini adalah cara mudah untuk mengukur tekanan barometrik, kelembaban, dan pembacaan suhu, semuanya tanpa menghabiskan terlalu banyak ruang.
Features of BME280
1. Interface: I2C & SPI
2. Supply Voltage: 1.71V to 3.6V
3. Temperature Range: -40 to +85°C
4. Humidity Range: 0% to 100% rel. humidity
5. Pressure Range: 300hPa to 1100hPa
6. Humidity sensor and pressure sensor can be independently enabled/disabled
Applications
1. Context awareness, e.g. skin detection, room change detection
2. Health monitoring/well-being
3. Home automation control
4. Control heating, ventilation, air conditioning (HVAC)
5. Internet of things
6. GPS enhancement & Indoor/Outdoor navigation
7. Weather forecast
8. Vertical velocity indication (rise/sink speed)
Pinout
The BME280 I2C interface uses the following pins:
1. VCC: 1.71V to 3.6V
2. GND: Connect to GND
3. SCL: serial clock (SCK)
4. SDA: Serial data (SDI)
5. CSB: Must be connected to VDDIO to select I2C interface.
6. SDO: The I2C address decides the pin. If SDO connects to GND(0), the address is 0x76, if it connects to VDDIO(1), the address is 0x77. In this module, we have connected it to VDDIO, so the address should be 0x77
Ada masalah dengan produk ini?