E2E-X2D1-U E2E X2D1 U E2EX2D1U 2M M8 Inductive Proximity Sensor PO26

E2E-X2D1-U E2E X2D1 U E2EX2D1U 2M M8 Inductive Proximity Sensor PO26

Desciption:
Shielded, Cylinder type (with screw) M8, DC 2-wire models, Sensing distance 2 mm ±10%, NO, Polarity, Pre-wired models

Feature:
[Cylinder type sensing head size] M8
[Type] Shielded
[Sensing method] Inductive type
[Sensing distance] 2mm -10% to +10%
[Setting distance] 0 to 1.6 mm
[Differential distance] 15% Max. of sensing distance
[Sensing object] Ferrous metal)Sensitivity lowers with non-ferrous metals.)
[Standard sensing object] Iron 8x8x1mm
[Response frequency] 1.5 kHz
[Power supply voltage] 12 to 24 VDC ripple(p-p):10% Max.
[Operating voltage range] 10 to 30 VDC
[Leakage current] 0.8 mA Max.
[Control output(Output type)] DC 2-wire models with polarity
[Control output(Switching capacity)] 3 to 100mA
[Indicator] Operation indicator(red), Operation setting indicator(green)
[Operation mode] NO
[Protective circuit] Surge suppressor
Output short-circuit protection
[Temperature influence] +/- 15% Max. of sensing distance in temperature range of -25 to +70 CEL
(As the basis for sensing distance of 23CEL)
[Voltage influence] +/- 1% Max. of sensing distance in rated voltage range +/- 15%.(As the basis for sensing distance at standard power voltage)
[Degree of protection] IEC60529: IP67
[Applicable standard(EC Directive(Low Voltage Directive))] EN60947-1,EN60947-5-2
[Applicable standard(EC Directive(EMC))] EMI: EN60947-5-2
Emission Enclosure: CISPR11 Group 1 class A
EMS: EN60947-5-2
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Conducted Disturbance: IEC61000-4-6
Immunity Burst: IEC61000-4-4
[Applicable standard(CCC mark)] Not equipped