Rainbow Cube kit RGB 4X4X4 Rainbowduino Compatible - ORIGINAL Seeed Studio DIY Kit 3D Light RGB LED Cube Box

{Original 100% - From Seeed Studio}
Rainbow Cube Kit-RGB 4x4x4 (Rainbowduino Compatible)
.
Gudangnya Import Komponen Elektronika dan Robotika. 100% ORIGINAL
# Mohon untuk menanyakan ketersediaan stock terlebih dahulu
# Karena jumlah stock data barang bisa berubah sewaktu waktu
# Dan nanti akan kami pastikan stock fisik yang ada di GUDANG

(×) Teliti Sebelum Membeli, Kami Sudah Pastikan Barang Yang Kami Jual Asli Original, Sesuai:
[✓] Sesuai Judul / Nama Barang
[✓] Sesuai Foto / Gambar
[✓] Sesuai Deskripsi
[✓] 100% Original
* Packing Sudah Di Pastika Aman Dan Yang Terbaik
* Unboxing Paket Saat Proses Pembukaan, Video Asli Tanpa Jeda Dan Edit

JIKA INGIN MINTA FOTO BARANG ASLI BISA CHAT KAMI !!!

× Barang Yang Sudah Di Beli Tidak Dapat Di Tukar Ataupun Di Kembalikan

1. Garansi tidak berlaku untuk kerusakan yang di sebabkan oleh:
* Kesalahan penggunaan (human eror)
* Terjatuh / cacat fisik
* Terkena air
* Short circuit
* Terdapat modifikasi pada board
2. Biaya kirim klaim garansi sepenuhnya di tanggung oleh pembeli
3. Garansi toko berlaku hanya 1 hari setelah barang di terima oleh pembeli
.
.
(×) Kunjungi TokoPedia WAREHOUSE ELECTRONIC
https://tokopedia.link/warehouseelectronic
* Untuk melangkapi produk ini
* Untuk melihat produk terkait
Cek Etalase nya :
1 Original Seeed Studio
https://tokopedia.link/eiMLFZgFdSb
3 LED Light
https://tokopedia.link/dOhjHOqP2Sb
__________
__________
.
This is a  kit of 4x4x4 RGB LEDs cube, containing 648mm RGB LEDs, custom PCBs and all supporting components  (6 free alternate LEDs are included in the kit). All parts are well packed in a nice package.

Compare with other similar projects, this one comes with super slim frame PCB design which not only looks very beautiful but also makes the assembly much easier.

You can control all LEDs of the Rainbowcube either by changing the Arduino program itself or by using the easy to use control Software.

You need some basic soldering skill to make this kit.

The Rainbowcube can be controlled by any kind of microcontroller but because it is a little bit complicated we strongly recommend that you are using the Rainbowduino to control the cube.

The Rainbowduino includes already all necessary drivers and connections and can be directly attached at the bottom of the Rainbowcube.

Part List
• 8mm RGB LED x70
• Cube Panel X1
• Slim Panel PCB X4
• Side A slim PCB X4
• Side B slim PCB X4
• 2.54mm 40pin male header X5
• 2.54mm 40pin female header X2
• 2.54mm 16pin female header X3
• 2.0mm 10pin female header X2
• 8pin female header X5
• 2X3 female header X1
• JST power cable X1
• 3.5mm 4pin green terminal X1
• 3.5mm DC jack X1
• 3mm LED red X1
• 3mm LED green X1
• 1K 1/8w resistor X4
• 10k 1/8w resistor X1
• 15k 1/8w resistor X1
• linear voltage regulator X1
• 10uF_16v_E-CAP X2

Documents
• Assembly instruction
http://www.seeedstudio.com/document/pdf/Cube.pdf

• Rainbowduino
https://www.seeedstudio.com/Rainbowduino-LED-driver-platform-Atmega-328-p-371.html

• Rainbowduino v3.0 Software Library
http://seeedstudio.com/wiki/images/9/9f/Rainbowduino3.0_Library.zip

• Complete schematic in PDF
http://seeedstudio.com/wiki/images/d/dc/Rainbow_Cube_Kit_-_RGB_4x4x4_LED_schematic_board.pdf

• Rainbowduino3.0 Library for Arduino 1.0
http://www.seeedstudio.com/wiki/images/4/43/Rainbowduino_for_Arduino1.0.zip

• Rainbow cube with Blurtooth Setch
http://www.seeedstudio.com/wiki/images/3/3c/RainbowWithBluetooth.zip

• Eagle CAD files
http://seeedstudio.com/wiki/images/b/b1/RainbowCube_v1.1_Panel_v1.2_Eaglefiles.zip