Download Tokopedia App
Tentang TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Kategori
Atur jumlah dan catatan

Stok Total: 268

Subtotal

Rp1.443.055

2.4G Signal Booster 4W Remote Control Enhancer Radio Signal Amplifier 3-8 km 4000mW 6-16V for FPV Transmitter Receiver

Rp1.443.055
  • Kondisi: Baru
  • Waktu Preorder: 30 Hari
  • Min. Pemesanan: 1 Buah
  • Etalase: Semua Etalase
Turbowing 2.4G Signal Booster 4W Remote Control Enhancer Radio Signal Amplifier 3-8 km 4000mW 6-16V for FPV Transmitter Receiver


Description:
This product is a bidirectional power amplifier, specially developed in 2.4 GHz band, which meets the standard of 802.11b/g/n. The product matches direct sequence (DSSS), orthogonal frequency division multiplexing (OFDM) and other frequency expansion technologies. By using Time Division Duplex(TDD) fast microwave detection technology and linear power amplifier technology, the radio frequency communication distance can be greatly extended while the transmission rate of 802.11b/g/n wireless equipment is constant.


Features:
Lightweight, mini size, advanced circuits ensure a fast and stable signal transmission and receiving.
13dB transmitting gain can enhance the transmission power by 20 times and increase the transmission distance.
4000mW of transmit power can greatly expand radio coverage area.
2.5dB noise figure, it can improve the product receiving sensitivity, greatly expand the receiving distance.
Can expand any 2.4G frequency band, suitable for the TDD work mode product.
Plug and play, no need others software setup.
All metal shell, good heat dissipation.


Specification:
Item Name: Signal Booster
Brand Name: Turbowing
Item NO.: RY24-4W13DB
Output power: 4000mW
Frequency range: 2.4-2.5Ghz
Operating voltage: 6V-16V
Supply current: 435mA at 9V
Receiving gain: 10dB1
Transmitting gain: 13dB1
Input power: 3-20dB
DC Power Consumption: 435mA@Pout 28dBm 9V
Noise figure: <2.5dB
TX / RX Switch Delay: <1us
LED Status: Green(TX); Red(RX)
Operating Temperature: -40 to 70 degree centigrade
Antenna connector: 2 x RP-SMA
Dimension: 64 x 34 x 18mm(not include antenna)
Weight: 57.8g
Original box package


Installation steps :
Step 1: Open the controller back cover and find the original signal cable plug of the remote controller.
Step 2: Remove the original signal line and plug in the signal booster feeder plug.
Step 3: Install the signal booster feeder plug, pay attention to IN / OUT not to reverse, power on the signal booster, turn on the remote controller, the power indicator is red.


Specifications:
Hign-concerned Chemical: None
Origin: Mainland China

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan