5.0/ 5.0
100% pembeli merasa puas
1 rating • 0 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 7
Subtotal
Rp8.658.000
Membrane Flimtec BW30-400 (10500 GPD)
Rp8.658.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Membrane
Toko buka Senin-Jumat jam 09.00-15.00Wib. Hari libur toko tutup
The FILMTEC BW30-400 element is the product of choice when the highest quality permeate is required. It was the first 400 square foot membrane elements on the market and continues to be widely used in new equipment and retrofits where system capital and productivity are factors.
The FILMTEC BW30-400 element is the product of choice when the highest quality permeate is required. It was the first 400 square foot membrane elements on the market and continues to be widely used in new equipment and retrofits where system capital and productivity are factors.
FilmTec's superior automated manufacturing technology results in the most consistent performance element-to-element and year-after-year.
BW30-400 elements deliver high flow and high rejection without being chlorinated during the manufacturing process. This is one reason why FILMTEC elements are more durable and may be cleaned over a wider pH range (pH 1 - 13) than other RO elements.
With more than a decade of proven performance, BW30-400 is the product you can rely on for years of trouble-free operation.
1. Permeate flow and salt rejection based on the following test conditions: 2000 ppm NaCl, 225 psi (15.5 bar), 77F (25C), pH 8, and 15% recovery.
2. Flow rates for individual elements may vary but will be no more than 15% below the value shown.
3. Sales specifications may vary as design revisions take place.
4. Active area guaranteed +/-3%. Active area as stated by FilmTec is not comparable to nominal membrane area often stated by some manufacturers.
The FILMTEC BW30-400 element is the product of choice when the highest quality permeate is required. It was the first 400 square foot membrane elements on the market and continues to be widely used in new equipment and retrofits where system capital and productivity are factors.
The FILMTEC BW30-400 element is the product of choice when the highest quality permeate is required. It was the first 400 square foot membrane elements on the market and continues to be widely used in new equipment and retrofits where system capital and productivity are factors.
FilmTec's superior automated manufacturing technology results in the most consistent performance element-to-element and year-after-year.
BW30-400 elements deliver high flow and high rejection without being chlorinated during the manufacturing process. This is one reason why FILMTEC elements are more durable and may be cleaned over a wider pH range (pH 1 - 13) than other RO elements.
With more than a decade of proven performance, BW30-400 is the product you can rely on for years of trouble-free operation.
1. Permeate flow and salt rejection based on the following test conditions: 2000 ppm NaCl, 225 psi (15.5 bar), 77F (25C), pH 8, and 15% recovery.
2. Flow rates for individual elements may vary but will be no more than 15% below the value shown.
3. Sales specifications may vary as design revisions take place.
4. Active area guaranteed +/-3%. Active area as stated by FilmTec is not comparable to nominal membrane area often stated by some manufacturers.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan