Atur jumlah dan catatan
Stok Total: 486
Subtotal
Rp8.000
BMS 3S 12V 20A Papan Modul PCB Pelindung Charger Baterai Lithium 18650 D3V!!
Rp8.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Produk modul dan kit ini TIDAK BERGARANSI, segala resiko kerusakan saat perakitan silakan ditanggung sendiri.
Kami tidak menerima pengembalian dengan alasan apapun, kecuali kekurangan jumlah atau kesalahan jenis barang yang dikirim.
Jika tetap memesan, kami anggap setuju dengan ketentuan tersebut.
Product Name: 3-series 12.6V 20A lithium battery protection board
Product Model:HW-375
Charging voltage: DC 12.6~13V
Continuous discharge current: Maximum 20A (If the heat dissipation environment is not good, please reduce the load current)
Continuous charging current: Maximum 10A
Product size: 20*60*4mm
Applicable options: Applicable to lithium batteries with a nominal voltage of 3.7V and a fully charged voltage of 4.2V (including 18650, 26650, polymer lithium battery), can be used with electric drills with starting current less than 60A and power less than 100W
Note 1: To successfully start the electric drill, you need 3 10C-20℃ power batteries, or 6 5℃-10℃
Power battery (recommended power battery models: SONY VTC4, VTC4A, VTC5A, VTC6), OV and 12.6V connecting wires, use copper wires of more than 2 square millimeters (don't use nickel sheets!!!).
Note 2: Strictly follow the wiring diagram for OV, 4.2V, 8.4V, and 12.6V. Do not touch any components on the board when welding the wires, and do not intentionally short-circuit.
Note 3: When connecting 3 groups of batteries in series, please ensure that the voltage of each group of batteries is the same. If not, please fully charge each group of batteries separately before connecting them in series.
Kami tidak menerima pengembalian dengan alasan apapun, kecuali kekurangan jumlah atau kesalahan jenis barang yang dikirim.
Jika tetap memesan, kami anggap setuju dengan ketentuan tersebut.
Product Name: 3-series 12.6V 20A lithium battery protection board
Product Model:HW-375
Charging voltage: DC 12.6~13V
Continuous discharge current: Maximum 20A (If the heat dissipation environment is not good, please reduce the load current)
Continuous charging current: Maximum 10A
Product size: 20*60*4mm
Applicable options: Applicable to lithium batteries with a nominal voltage of 3.7V and a fully charged voltage of 4.2V (including 18650, 26650, polymer lithium battery), can be used with electric drills with starting current less than 60A and power less than 100W
Note 1: To successfully start the electric drill, you need 3 10C-20℃ power batteries, or 6 5℃-10℃
Power battery (recommended power battery models: SONY VTC4, VTC4A, VTC5A, VTC6), OV and 12.6V connecting wires, use copper wires of more than 2 square millimeters (don't use nickel sheets!!!).
Note 2: Strictly follow the wiring diagram for OV, 4.2V, 8.4V, and 12.6V. Do not touch any components on the board when welding the wires, and do not intentionally short-circuit.
Note 3: When connecting 3 groups of batteries in series, please ensure that the voltage of each group of batteries is the same. If not, please fully charge each group of batteries separately before connecting them in series.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan