16 way relay module / low level trigger / dual PCB/ bidirectional

SELAMAT DATANG.BARANG INDENT 15-20 HARI YA KAK :) SILAHKAN DIORDER. Measuring Range : ? Sensor Type : Holzer Hysteresis : ? Linear : ? Sensitivity : ? Repeatability : ? Resolution : ? The standard type 16 circuit relay control module is triggered by low level signal. Only 5mA current can be to drive the relay of 10A. The module adopts good quality power relay, high power and high voltage triode, red and blue signal indicator and military level double-sided PCB plate. It is widely in various power control situations. A module description 1, the module uses genuine quality relay, often open interface maximum load: AC 250V/10A, DC 30V/10A; 2, the use of high power and high voltage triode, strong driving capacity, stable performance; trigger current 5mA; 3, module working voltage has 5V, 12V, 24V to choose from; another 1, 2, 4, 8, 12 road modules are available. 4, relay low level pull in, module contains current limiting resistor, low level can be GND, or single chip I/O port low. 5, fault tolerant design, even if the controlis broken, the relay will not act. 6, power indicator (red), 16 relay status indicator (blue) 7, the interface design is humanized, all interfaces can be directly connected through the terminals, so it is very convenient. 8, module size: 15.0cm * 10.0cm * 2.0cm (length * width * height) 9. There are 4 3mm holes fixed bolt holes for easy installation. Two module interface Module control terminal: there are 18 wire interfaces, all interfaces have wiring terminals, which is convenient for users. 1, VCC: DC power supply positive pole (5V, 12V and 24V modules are available). 2, GND: DC power supply negative pole 3, CL1-CL16: relay control interface, low level corresponding relay suction. Relay output: there is a 48 wire interface, all interfaces have wiring terminals, easy for users to use. 1, NO1--NO16: the relay often opens the interface, the