PCAN-USB Pro FD: High-speed USB 2.0 to CAN FD and LIN interface

SELAMAT DATANG.BARANG INDENT 15-20 HARI YA KAK :) SILAHKAN DIORDER. Sensor Type : Differential Holzer PCAN-USB Pro FD IPEH-004061 Invoice Name: CAN Bus Monitoring System PCAN-USB Pro FD The Adapter Can Connect the CAN FD and Lin Network to the Computer through USB. The Two Kinds of Field Buses Can Be Connected at the Same Time, and the Corresponding Cables (2 X CAN FD, 2 X Lin) Can Be to Connect up to 4 Channels. Each Can FD Channel Is Separately Isolated from USB and Lin to Reach 500V. Simple to Use and Its Strong Aluminum Alloy Shell Makes This Interface Especially Suitable for Carrying and Going out. D-Sub Interface Pinout Connections 1 No Connection/Optional +5V 2 CAN-L 3 GND 4 There Is No Connection 5 There Is No Connection 6 GND 7 CAN-H 8 There Is No Connection 9 There Is No Connection The New CAN FD Standard Is Characterized by Higher Data Transmission Bandwidth. Each Can FD Frame (Instead of the Current 8 Bits) Can Transmit up to 12 Mbit/S Bit Rate. CAN FD Is Backward Compatible with CAN 2.0 A/B Standard, So Can FD Nodes Can Be in Existing Can Networks. However, in This Case, the CAN FD Extension Is Not Applicable. Characteristics Adapter for High-Speed USB 2.0 (Compatible with USB 1.1 and USB 3.0) Two D-Sub Connectors Are to Send and Receive CAN FD and Lin Packets (Both CAN FD and Lin Bus Distribution) Timestamp Resolution 1μs The 5-V Power Supply on the D-Sub Connector Can Be Connected by Welding Jumper Wires, Such as an External Bus Converter. Through the USB Power Supply Extended Operating Temperature Range from-40 to 85°C (-40 to 185 °F) CAN Performance Characteristic A/B and FD 2.0 1.0 Can Specification CAN FD Bit Rate for Data Domain (64-Bit Maximum) from 40 Kbit/S to 12 Mbit/S Maximum Can Bit Rate from 40 Kbit/S to 1 Mbit/S FPGA Implementation of CAN FD Controller Nxtja1044gt Can Transceiver Independent Optical Decoupling USB and