Surface Bacteria Portable Germ Atp Monitor Detection Detector Test

Barang Preorder/Indent Estimasi 15-20 hari. Oscilloscope Parts amp; Accessories Type : Oscilloscope Parts Measurement accuracy : 5X 10-18mol Examination range : 0 to 9999 RLUs Detect interference : +5% or +5 RLUs Operating humidity range : 20-85% Check out mode : RLU, coliform screening Instrument size : 192X 87X34mm Coliform : 1-106cfu Long detection time : 15 seconds Operating temperature range : 5°C to 40°C ATP recovery rate : 90- 110% Number of result limits that can be set : 251 pcs Standby state (20°C) : 6 months Notice English working guidance machine English manual provided Swab kit operating instructions The swab test tube contains a unique high-sensitivity liquid stable integrated reagent, combined with an ATP detector to detect bacteria or other microorganisms on the surface of the object and the total ATP activity contained in the food residue, giving a fast and comprehensive clean test result . Instructions for use ◆Open the detection tube and take out the swab to sample, the sampling area is about 10cmx10cm, as much as possible to smear the surface of the cotton swab as much as possible; ◆Do not touch the swab or test stick; ◆After the sample in the swab reacts with the solution, it needs to be placed in a fluorometer and read within 1 minute. ◆The swab solution has been diluted and can be safely on food surfaces. Note: Please keep away from light before use. Steps 1. Hold the ball tube, take out the wetted swab from the test tube, and smear the detection area. Insert the test piece into the test tube. 2. Hold the suction valve, turn the device upside down and pinch the bulb with the thumb and middle finger of the other hand to break it from the suction valve. Squeeze the bulb twice, squeeze the liquid out of the bulb, shake gently two or three times to bring it intowith the cotton swab specimen in the detection tube. 3. Put the