Atur jumlah dan catatan
Stok Total: Sisa 4
Subtotal
Rp3.799.000
Mini Bottle Spare Air Backup Oxygen Tank Pro 3 Cuft W/ Filling Adapter
Rp3.799.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Tank Tabung Selam
MINI BOTTLE TANK PRO TANK 3 CUFT + FILLING ADAPTER
RESPIRATOR IS MADE OF AVIATION ALUMINUM :
aviation aluminum, standard portable oxygen tank parameters manufacturing, and meet the manufacturing standards of diving equipment.
THE PRINCIPLE : Pressure relief from the top hold down the top to relieve the pressure inside the bottle. Note: the pressure shall not exceed 20 pressures.
REGULATOR : open at any time, breathing balance on demand single regulator, with a pressure gauge, can show how much air.
DESIGN : Engineering bite silicone bite safety fit ergonomic design.
SPESIFICATION :
Weight : Approx. 1187g / 41.9oz
Respirator :
Material : aviation aluminum + silica gel
Size : Approx.13 * 6 * 35.2 * 5.8 cm/5.1*2.4*13.9*2.3in
Specification : 0.5 l
Gas capacity : 3.0 CU FT
Length : Approx.13.4 "/ 34 cm
Diameter : 2.25 : "LB. / 5.71 cm
Maximum pressure : 3000 PSI/200 BAR/20MPA
Number of surface breaths : about 30 (2.5 LITERS per breath)
(it can breathe about 57 mouths of air on the surface, and adults can breathe about 21 times under the mouth of water, 7 meters under the water for about 6 minutes!
The product contains an inflatable head, which can be directly inflated in a standard diving cylinder and can be fixed on the BCD. The product is portable and independent of the respiratory system.)
PUT TANK INTO THE COLD WATER OR WRAP WITH WET CLOTH DURING FILLING!
RESPIRATOR IS MADE OF AVIATION ALUMINUM :
aviation aluminum, standard portable oxygen tank parameters manufacturing, and meet the manufacturing standards of diving equipment.
THE PRINCIPLE : Pressure relief from the top hold down the top to relieve the pressure inside the bottle. Note: the pressure shall not exceed 20 pressures.
REGULATOR : open at any time, breathing balance on demand single regulator, with a pressure gauge, can show how much air.
DESIGN : Engineering bite silicone bite safety fit ergonomic design.
SPESIFICATION :
Weight : Approx. 1187g / 41.9oz
Respirator :
Material : aviation aluminum + silica gel
Size : Approx.13 * 6 * 35.2 * 5.8 cm/5.1*2.4*13.9*2.3in
Specification : 0.5 l
Gas capacity : 3.0 CU FT
Length : Approx.13.4 "/ 34 cm
Diameter : 2.25 : "LB. / 5.71 cm
Maximum pressure : 3000 PSI/200 BAR/20MPA
Number of surface breaths : about 30 (2.5 LITERS per breath)
(it can breathe about 57 mouths of air on the surface, and adults can breathe about 21 times under the mouth of water, 7 meters under the water for about 6 minutes!
The product contains an inflatable head, which can be directly inflated in a standard diving cylinder and can be fixed on the BCD. The product is portable and independent of the respiratory system.)
PUT TANK INTO THE COLD WATER OR WRAP WITH WET CLOTH DURING FILLING!
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan